Table of Contents
Advertisement
Therm-App MD User Manual
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
6.6 General Settings
◼
Disable Screen Timeout –
timeout to be disabled to enable ongoing use of Therm-App® (only
valid when Therm-App® is connected and image is shown).
◼
Gain Limit Mode - Therm-App® is using noise filter by averaging
frames for temporal noise reduction.
◼
Alert Mode Settings – Allows you to configure Alert Mode settings.
➢
Action - Allows you to define Snapshot, Video Recording, Video
Streaming, Vibrate and Play Alert.
o
Snapshot - A snapshot is taken every time a measured
temperature is met or above the preset temperature
threshold
o
Video Recording: Will record video for as long as a
measured temperature is met or above the preset
temperature threshold. (recordings are stored under date
and time file name).
o
Video Streaming: Will stream to a preset location for as long
as the temperature is met or above the preset temperature
threshold.
o
Vibrate: Will vibrate every time a measured temperature is
met or above the preset temperature threshold (This option
is available only for a mobile device).
o
Play alert: Plays an audio file alert every time a measured
temperature is met or above the preset temperature
threshold.
Note: for best performances, it is recommended to activate not
more than three alert actions simultaneously.
➢
Advanced Parameters:
o
Detection Duration (Seconds): Sets how long the object
needs to be in the set field to trigger the alert.
Alert Delay (Seconds): How long Therm-App® should wait to
o
send consecutive alerts after the first alert is triggered (time
between alerts).
o
Recording Time After Detection: How long you want to
continue recording after the person or object leaves the
field of view.
o
Object Size: Sets the minimum size of the object that will
trigger the alert:
("Small"- 4x4 pixels, "Medium small"- 8x8 pixels, "Medium
big"- 16x16 pixels, or "Big"- 32x32 pixels).
o
Tone Frequency: Allows you to select one of five different
alarm tone.
------------------------------------------------------------------------------------------------------------------------------------------------------------
Allows
the device's default screen
Page 15 of
25
Advertisement
Table of Contents
