Table of Contents
Advertisement
MORE INFORMATION ABOUT YOUR VCR
TROUBLESHOOTING
AREA
INSTALLATION
POWER
PLAYBACK
RECORDING
Downloaded from:
http://www.usersmanualguide.com/
PROBLEM
TV will not tune in to
• Check all the cables are correctly
the VCR.
connected.
• Check your TV manual for correct tuning of
your TV.
Auto Installation
• Reset the VCR and complete AUTO
screen does not
INSTALLATION again. (Refer to VCR Reset at
appear when the
the back of the book.)
VCR is switched on
OR Auto Installation is
not complete.
Display is not working. • Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug
another appliance in).
VCR will not operate -
• Press the
appears in VCR
disengage timer.
display.
VCR will not respond
• Check CHILD LOCK is not engaged.
to any commands.
• Safety device operating: unplug VCR for 2
hours.
No picture appears.
• Make sure the TV is set to the video channel.
• Check all connecting cables.
Playback picture is
• Adjust the tracking using
K
snowy.
• Try another tape.
• The video heads may have been
contaminated - refer to a SHARP Service
Facility.
Playback recording
• Ensure the VCR is connected to a stereo TV
does not playback in
and SCART lead.
stereo.
• Programme may not carry stereo.
Tape is automatically
• The record-protection tab has been
ejected when
removed.
pressing
REC
(
©
) or
TIMER ON/OFF
buttons.
GB-30
POSSIBLE CAUSE/CURE
button to
TIMER ON/OFF
CHANNEL
L
/
buttons.
Advertisement
Table of Contents
