Radio Operation - Sharp QT-CD131H Operation Manual

<P=002>

Radio operation

■
1
FUNCTION
STAND-BY
■
You can store up to 30 stations (20 FM stations and 10 AM stations) and recall them at the push of a
button. FM stations can be recalled in either stereo or mono.
1
4
● 20 FM stations can be preset (preset channels 1 through 20).
● 10 AM stations can be preset (preset channels 1 through 10).
● If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the
Downloaded from: http://www.usersmanualguide.com/
Manual tuning
2
Set the Select the desired fre-
FUNCTION quency band. (FM ST,
switch to TUNER. FM or AM)
TAPE TUNER CD
BAND
ON
● To receive an FM stereo
tra nsmission , press th e
BAND button so that the "ST"
indicator on the display lights
up.
● The "
when an FM broadcast is in
stereo.
Preset tuning
2
Perform steps 1 - 3
of the "Manual tun-
ing" section.
● Th e displa y's "MEM-
Within 5 seconds, press the MEMORY button to
store that station in the selected station preset
number memory.
MEMORY
(There are no presets 11 through 20 for AM stations.)
operation from step 2.
3
Press the TUNING (
ton to tune into the desired sta-
tion.
FM STERO
FM
ST
MHz
ST
FM MONO
FM
MHz
● Holding it down for more than 0.5 sec-
onds will cause the frequency to change
AM
rapidly until the button is released.
KHz ● If the FM reception is poor, press the
AM
BAND button so that the "ST" indicator
goes out.
● Although the reception changes to mon-
aural, the sound becomes clearer.
● Please note that when the unit is being
j
tuned in the FM stereo mode, interim
" indicator lights up
station noise as well as weak stations
are suppressed. Only in the FM monau-
ral mode, can weak and noisy stations
be received.
FM
ST
3
Press the MEMORY Within 5 seconds, press the
button. PRESET (
the preset number to be pro-
MEMORY
grammed flashes in the display.
ORY", "station number"
and "CH" indicators will
flash.
5
QT-CD131H(SUK) TINSE0007SJZZ
X W
or ) but-
TUNING
DOWN UP
X W
or ) button until
PRESET
DOWN UP
5
Repeat steps 1 - 4 to set
other preset stations, or to
change a preset station.