Sharp 28LF-92H Operation Manual page 13

Setting Hue (In AV mode only) :
• Using “ ” or “ ” button select Hue.
• Press “ ” button to increase Hue level.
• Press “ ” button to decrease Hue level.
Hue adjust is functional only when NTSC 3.58/4.43 is applied in
AV mode. It does not appear when other colour systems used.
Picture Mode
This item is used to change the picture mode. By pressing
“ ” or “ ” button you may choose one of these options:
BRIGHT, STANDARD, SOFT, MANUAL.
Colour Temp
• Using “ ” or “ ” button select Colour Temp.
This item is used to change the Colour Temperature. By
pressing “ ” or “ ” button you may choose one of these op-
tions: COOL, WARM, NORMAL.
Wide Mode :
• Using “ ” or “ ” button select Wide Mode.
With this item you can select the width of the picture. By
pressing “ ” or “ ” button you may choose one of these op-
tions : AUTO, NORMAL, ZOOM 14:9, CINEMA, 16:9ZOOM S
or FULL.
Wide mode can be set by “
Each time you press the wide mode button “
of the picture changes as indicated:
6VUPÃÃÃÃÃÃÃÃÃIPSH6GÃÃÃÃÃÃÃÃÃÃaPPHÃ #)(ÃÃÃÃÃÃÃ8DI@H6ÃÃÃÃÃÃÃÃ %)(aPPHÃTÃÃÃÃÃÃÃAVGG
Downloaded from: http://www.usersmanualguide.com/
7SDBCUI@ TT
8PI US6TU
8PGP VS
TC6S QI@TT
UDGU
CV@
QD8UVS@ÃHP9 @ H6 IV6G
7SDBCUI@ TT
8PI US6TU
8PGP VS
TC6S QI@TT
UDGU
QD8UVS@ÃHP9 @
H6 IV6G
8PGP VSÃU@HQ
IPS H6G
7SDBCUI@ TT
8PI US6TU
8PGP VS
TC6S QI@TT
UDGU
QD8UVS@ÃHP9 @ H6 IV6G
8PGP VSÃU@HQ IPS H6G
” wide mode button also.
8PI US6TU
8PGP VS
TC6S QI@TT
UDGU
QD8UVS@ÃHP9 @ H6 IV6G
8PGP VSÃU@HQ IPS H6G
X D9@ÃHP9 @ 6VUP
When you select ZOOM 14:9, CINEMA or 16:9ZOOM S, you
can change the vertical scroll by pressing “ ” / “ ”.
* Auto mode (VPS code): The VPS signal is sent by some
broadcasting stations with information of the original size.
When the TV is in AUTO mode and receives the VPS sig-
nal, it changes the size automatically as indicated below:
When the TV is receiving VPS code 16:9 the TV selects
CINEMA automatically.
When the TV is receiving VPS code 14:9 the TV selects
ZOOM 14:9 automatically.
When the TV is receiving VPS code 4:3 the TV selects
NORMAL automatically.
When the TV does NOT receive VPS code the TV selects
FULL automatically.
External source: When you are watching the TV set
through the Euro-SCART AV-1 terminal and it receives infor-
mation of 16:9 format (through the audio-video control pin)
the TV selects FULL automatically.
Wide Mode (Special detail information)
Special detail information about FULL, NORMAL, ZOOM
14:9, CINEMA (16:9) and 16:9ZOOM S.
FULL
With Full Mode you adapt the picture 16:9 format while also
stretching the centre of view. This is an advantage, for exam-
ple, when watching sports games where there is no real fixed
centre of the picture.
NORMAL
You can watch 4:3 programs in 4:3 format by switching to
NORMAL Mode function.
ZOOM 14:9
Adapts the 14:9 broadcast cinema movies to the 14:9 Mode.
”, the width
- 12 -