This Manual; Hardware Reset Of The Device - FAG FLUO DX User Manual

This Manual

The manual describes the functions of the Device using a A,B,C,D labelling of the keys. A is the left
most key, D the right most key.

HARDWARE RESET of the DEVICE

On the bottom of the device you can find the RESET key. Press this key to perform a Hardware RESET.
After a Hardware Reset the FLUO DX will show the key information about the device such as Serial
Number, Firmware version, Device ID.
Key A: Reset the device parameters to factory defaults.
Key B: Transfer measurement data via IR-Interface to the Host PC.
15.03.2020 3