System Software Update Procedure - Roland BOSS BR-1600CD Service Notes

Jan.2004
Precautions for initialization
• Press [EXIT/NO] if you want to cancel an initialization process.
• In certain cases, the message "Save Current?" will appear during
the initialization procedure, and this indicates that the current song
contains audio that has been newly recorded or edited, or modified
parameters that have not yet been saved. If you want to save your
song before starting the initialization process, press [ENTER/YES];
if this will not be necessary, press [EXIT/NO]. If you proceed
without saving your song, all of the new recordings, audio edits,
and new parameter settings will be permanently lost.
SYSTEM SOFTWARE UPDATE
PROCEDURE
Required Items
• Updater CD-ROM (#17041404)
1.
Simultaneously hold Procedures down the [STOP] and [PLAY] buttons
and press the [POWER] button.
* Continue to hold down the [STOP] and [PLAY] switches until the updater
screen is displayed.
2.
When "Insert Disk" is displayed, press the CD-R/RW drive's [EJECT]
button to open the CD-R/RW drive tray.
3.
Place the updater CD in the CD-R/RW drive.
4.
Close the CD-R/RW drive tray; the contents are read from the CD, and
the version is displayed.
5.
Confirm the content shown. "Update OK?" appears in the display; press
the [ENTER/YES] button of the update is to be performed.
(Press the [EXIT/NO] button if abandoning the update.)
6.
The update begins.
* Do not turn off the power while the update is in progress.
When the update is finished, the message "Completed" is displayed, and the
CD-R/RW drive tray automatically opens.
7.
When "Power Off" appears in the display, press the [POWER] button to
turn off the power.
When you file the update procedure, please retry the update procedure.
(from 1st procedure)
26