Roland BOSS BR-1600CD Service Notes page 18

Jan.2004
• The range of available write speeds can sometimes be limited by the type
of disc being used. In such cases, the BR-1600CD will allow you to select
only the supported speeds using the TIME/VALUE dial.
• If you are using CD-R/RW discs intended for highspeed writing, the
frequency of write errors may increase if the x2 or x4 speed is selected. It
is recommended that you use the x8 speed for high-speed discs.
8.
Press [ENTER/YES].
If you want to cancel the backup, press [EXIT/NO].
The message "Write Sure?" will appear.
fig.41-04d
9.
Press [ENTER/YES] once again.
The BR-1600CD will begin writing data to the CD-R/RW disc.
When the message "Complete!" appears, it indicates that the backup has
been successfully completed.
Backing up user data (User Backup)
The BR-1600CD allows you to back up the following types of user data to CD-
R/RW discs.
• Insert effect patches
• Mastering Tool Kit patches
• Speaker Modeling patches
• Vocal Tool Box patches
• Rhythm arrangements, drum patterns, bass patterns, and loop phrases
1.
Insert an empty CD-R/RW disc into the BR-1600CD's CD-R/RW drive.
The drive's access indicator will begin to flash. Wait until this indicator
stops flashing and turns off before proceeding.
2.
Press CD-R/RW [DATA SAVE/LOAD].
The Data CD screen will appear.
fig.41-05d
3.
Press [F1] (BACKUP) or move the cursor to the BACKUP icon, and then
press [ENTER/YES].
The Backup screen will appear.
fig.41-01d
4.
Press [F2] (USER) or move the cursor to USER, and then press [ENTER/
YES].
The User Backup screen will appear.
fig.41-07d
18
5.
Move the cursor to the type of data you want to back up and press [F1]
(SELECT).
The data will selected for backup.
fig.41-07ad
A number of types of data can be selected in this way for backup, and an
asterisk (*) will be displayed for each selected type. To cancel a selection,
simply press [F1] once again.
Data that can be backed up:
Effects/Arrange./Drums&Bass Ptn.:
• Insert Effects User Patches
• Vocal Tool Box User Patches
• Mastering User Kit User Patches
• Speaker Modeling User Patches
• User Rhythm Arrangement
• User drum pattern
• User bass pattern
The data described above will all be saved.
Loop Phrase:
User loop phrases will all be saved.
If you would like to back up all such data on the hard disk in a single
operation, press [F2] (ALL). All data types will be selected for backup.
To cancel this selection, press [F2] once again. This deselects all data
types.
6.
When you have selected all of the data you want to back up, press [F4]
(GO).
The message "Write Speed?" will appear.
fig.41-08d
7.
Use the TIME/VALUE dial to set the write speed.
Write Speed:
x2 (352 Kbps)Writes twice as fast.
x4 (704 Kbps)Writes four times as fast.
x8 (1408 Kbps)Writes eight times as fast.
• The range of available write speeds can sometimes be limited by the type
of disc being used. In such cases, the BR-1600CD will allow you to select
only the supported speeds using the TIME/VALUE dial.
• If you are using CD-R/RW discs intended for high-speed writing, the
frequency of write errors may increase if the x2 or x4 speed is selected. It
is recommended that you use the x8 speed for high-speed discs.