Table of Contents
Advertisement
NAMES AND FUNCTIONS OF REMOTE CONTROLLER
REMOTE CONTROLLER
• This controls the operation of the indoor unit.
Signal range to reach air-conditioner is about 7 meters. If indoor lighting is controlled
electronically, the range of control may be shorter, in some cases, the control signal may not be
received.
This unit can be fixed on a wall using the fixture provided. Before fixing it, make sure the indoor unit
can be controlled from the remote controller.
• Handle the remote controller with care.
Dropping it or getting it wet may compromise its signal transmission capability.
Transmission Sign
The transmission sign blinks
when a signal has been sent.
ECO Button
Use this button to set the ECO
mode.
(
Page 12)
SLEEP button
Use this button to set the sleep
timer.
(
Page 13)
OFF TIMER Button
Select the turn OFF time.
(
Page 11)
ON TIMER Button
Select the turn ON time.
(
Page 11)
Precautions for Use
• Do not put the remote controller in the following places.
• In direct sunlight
• In the vicinity of a heater.
• Handle the remote controller carefully. Do not drop it on the floor, and
away from water.
• Once the outdoor unit stops, it will not restart for about 3 minutes (unless
you turn the power switch off and on
This is to protect the device and does not indicate a failure.
• If you press the FUNCTION selector button during operation, the device
may stop for about 3 minutes for protection.
Signal Transmission
).
- 7 -
POWERFUL Button
Press this button to start
powerful operation. (
Page 11)
FAN SPEED Button
Select the fan speed for each
mode.
START/STOP button
Press this button to start operation.
Press it again to stop operation.
AUTO SWING (Horizontal)
Button
Control the angle of the
horizontal air deflector.
(
Page 14)
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
AUTO SWING (Vertical)
Button
Control the angle of the
vertical air deflector.
(Page 14)
Advertisement
Table of Contents
