Refrigerant Piping Connections; Installation Overview - LG LA090HYV3 Installation Manual

Single zone art cool premier wall mounted
Table of Contents

Advertisement

Installation
Single Zone Wall-Mounted systems are one-to-one
systems. There is a direct piping connection between the
outdoor unit and the indoor unit. The figure at right illus-
trates the basic pipe connections between the outdoor
and indoor unit. Refer to the illustration when proceeding
with pipe connections.
This illustration shows the indoor unit being installed at
a higher position than the outdoor unit. However, if the
outdoor unit be installed at a higher position than the
indoor unit, the basic pipe connections are the same.
Refer back to the tables within the "Connection Limita-
tions" section for specific length limitations in conjunction
with outdoor unit and indoor unit positioning.
• When proceeding with piping connections, adhere to
pipe support spacing lengths as shown in the "General
Refrigerant Piping System" Information section. Refer
to the "Pipe Supports" section for information on using
clamps and pipe support materials.
• Always adhere to local codes regarding piping and ac-
curate support spacing along the piping system.
• Always include insulation on all refrigerant and drain
piping to ensure condensate does not form and cause
damage to walls, floors, etc.

REFRIGERANT PIPING CONNECTIONS

Figure 31: Installation and Piping Connection Overview (Appearances Will Vary
Depending on Model).
Installation Plate
Bottom Cover
Wiring Cable Access Holes
System refrigerant piping, drain hose extensions, and power wiring / communications cables
must be field supplied.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Air Filter
Vapor (Gas) Service Valve
(Vapor [Gas] / Liquid) Service Valve Caps
Liquid Service Valve

Installation Overview

Field-Supplied Sleeve
Field-Supplied Sealant
Bend the piping as closely
to the wall as possible, but
do not break it.
Vapor (Gas)
Pipe (Larger Pipe)
Liquid Pipe (Smaller Pipe)
Field-Supplied Clamp
Drain Hose
Power Wiring /
Communication (Connection) Cable
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents