Pollard 152 Assembly Instructions

www.pollardbros.com
Includes:
(2) or (3) Bench Legs
6
x
6
x
1/4" Lock Washer
13
x
5/16" Lock Washer
12
x
3/8" Lock Washer
1
Stand legs upright and face as shown. Note: 4'
benches and under come with two legs, and 5'
benches and over come with three legs.
2
Attach stringer and angle tie rods using 3/8" x
3/4" machine bolts, 3/8" hex nuts, and 3/8"
washers. HAND TIGHTEN ONLY. **When shelf is
provided instead of angle tie rods, use 3/8" x 3/4"
hardware to attach to bench leg crosses in place of
tie rods.**
152 - HD Plate Top Bench
Assembly Instructions
Tools Needed:
wrench
(2) or (3) Back Plate Brackets
13
1/4" Hex Nut
x
12
x
6
x
at head screwdriver
phillips head screwdriver
(1) Back Plate
(1) Stringer
5/16" Hex Nut
3/8" x 3/4"
Hex Head
Machine
Screw
1/4" x 5/8"
Round Head
Machine
Screw
(2) Tie Rods or (1) Lower Shelf
12
x
3
x
10
x
3/8" Hex Nut
5/16" x 3/4"
Flat Head
Machine
Screw
5/16" x 1"
Flat Head
Machine
Screw