Service Monitor - McQuay MDS Series Service Manual

4.6.2 Service Monitor

Service monitor interface is used to plot graph by using the MDS system parameter. By viewing the graph, it will
provide observation on the system operation condition. Total 5 parameters (outdoor or indoors) can be selected.
There are 6 function buttons at the bottom of Service Monitor screen. The function of the buttons is as follow:
 First page
: Proceed to the first page of the graph
 Back page : Proceed to the previous page of the graph
 Next page
: Proceed to next page of the graph
 End page
: Proceed to the last page or the graph
 Set Param : A new window will prompt out allowing user to determine which parameter to plot.
Tick to select ID Tick to select ID
parameter to be parameter to be
displayed displayed
Max. value of Y-axis Max. value of Y-axis
Min. value of Y-axis Min. value of Y-axis
 Output Data : A new window will prompt out allowing user to save the data (in excel sheet) to personal PC.
Service Manual SM-MDS_(ii)
Service Monitor Window in Smart Commander
Major unit Major unit
Click to display Click to display
Display the data Display the data
the graph the graph
of selected date of selected date
Input Input
Display the data Display the data
file file
of real time of real time
4
41