To bypass blocks within the HX Stomp, make sure the block you want to control is
highlighted and then follow the steps below using the MIDI "Learn" feature. When you press
(or double press) a button, the Micro will automatically send its respective MIDI CC message
to the Stomp and the Stomp will sync to the Micro.
To toggle effect parameters up/down, follow the steps below to assign a button on the Micro
to the effect you choose. When you press (or double press) a button, the Micro will
automatically send its respective MIDI CC message to the Stomp and the Stomp will sync to
the Micro.