Green Bank (Looper Mode) - Jet Micro HX 3.0 User Manual

Operating the JET Micro

Green Bank (Looper Mode)

The green bank is dedicated to using the looper within the HX Stomp. Remember, in order to use
the looper features you must have one of the blocks assigned to the "Looper" within the Stomp. All
of the buttons listed below are pre-programmed and cannot be user assignable.
Short Press Button A - toggles between record and overdub
Short Press Button B - stops the active loop. If you press the record button (button A)
after stopping the active loop, the Stomp will automatically erase the previous loop
and begin to record a new loop.
Short Press Button C - plays the recorded (or overdub'd) loop
Long Press Button A - toggles between undo and redo the most recent loop
Long Press Button B - toggles between half speed and full speed
Long Press Button C - plays the loop once