Red Bank (Stomp Mode); To Recall Snapshots - Jet Micro HX 3.0 User Manual

Table of Contents

Advertisement

Operating the JET Micro

Red Bank (Stomp Mode)

The Red Bank is where you will likely spend most of your time with the JET Micro. In this bank you
can toggle blocks on/off, toggle effect parameters up/down, recall Snapshots, and scroll up and
down presets. You can even setup one of the buttons to be an "always active" tap tempo if you
wish, see "Global Settings" for details and how to set this up.
Each button has three time based press actions, which are a short press, double press, and
long press.
Short Press - quickly press and release the button within 1/2 of a second
Double Press - quickly press the button at least two times within a 1/2 of a
second 
Long Press - press and hold the button for at lease 3/4 of a second and
then release
To recall Snapshots, simply do a long press of any button.
Long Press Button A - recalls Snapshot 1
Long Press Button B - recalls Snapshot 2
Long Press Button C - recalls Snapshot 3
Two button presses will scroll up and down presets. You can also hold down the buttons to
fast scroll in either direction
Short Press AB - scrolls down presets
Short Press BC - scrolls up presets

Advertisement

Table of Contents
loading

Table of Contents