Table of Contents
Advertisement
6B. USING THE REPAIR PATCHES
1.
Deflate the screen. Then clean the damaged area, allowing
it to dry
thoroughly.
2.
Cut out a portion of the patch to the desired size,
rounding
the corners as
illustrated.
CORRECT
OR
INCORRECT
3. Remove the adhesive backing from the patch, then position the patch over
the
damaged area.
4. Smooth out any bubbles so that the patch
lays flat.
5. Allow the patch to sit for at least 30
minutes
before
inflating
the screen.
6C. AIR PUMP MAINTENANCE
•
Always unplug
the
air pump before performing maintenance.
•
Periodically examine the air pump for potentially unsafe conditions such as a damaged cord, plug,
housing,
or parts.
If
damage
is
found, do not use the product until
it has been
properly
repaired
by a
qualified professional.
If the supply cord
is
damaged, it must be
replaced
by the
manufacturer,
its service agent, or
simi
larly
qualified persons
in
order to avoid a hazard.
•
The air pump does not require any
lubrication
and has no
user
serviceable parts.
Do
not attempt to
service the air pump.
•
Clean with a damp cloth. Do
not immerse
the air pump in water.
•
Regularly check the intake and output openings and keep free of dirt,
leaves,
etc.
•
When not in use, store the air pump
indoors
in a dry place.
•
Store the air pump upright on a stable surface.
•
Loosely coil the cord and place it beside the air pump.
7. CUSTOMER SERVICE
Should you experience any problems with your product, please contact
us before returning the item to
the place of purchase. We're here to help!
U.S. Support: kodak@camarketing.com, 844-516-1539
International Support: kodakintl@camarketing.com, 844-516-1540
6
Advertisement
Table of Contents
