Table of Contents
Advertisement
4.
Attach
the fabric tube to the air pump, ensuring
the
tube is not twisted.
5. Wrap the drawstring around the tube and the end of the air pump, then tie it securely in
place.
6. Plug in the air pump, then
turn
on the power.
7.
Once
the
screen has inflated, connect each of the four (4) included ropes to either side.
8.
Secure
the
screen in place by driving the included stakes
through
each of the loops, located at the
base of the screen.
9. Secure the air pump to the ground using the included stakes.
5. DEFLATION AND STORAGE
1. Turn off the air pump and unplug it from the outlet
2. Remove all stakes
in
the screen and air pump.
3. Untie the drawstring from the intake tube and allow
the
screen to fully deflate.
4. Remove the white screen by undoing the attached buckles.
5.
Slowly roll the
screen,
pushing the air out as you do
so.
6. Store inside the included carrying case.
6. CARE AND MAINTENANCE
Carefully read and follow these
instructions
to maintain the integrity of your screen and ensure it
remains in good condition.
6A. SCREEN MAINTENANCE
•
As an outdoor product, the screen may be subject to wear and
tear.
Always inspect for signs of
fabric damage. Weak or torn surfaces should be repaired
immediately.
•
To clean
,
wipe the screen with a dry
cloth,
or a cloth dampened with a
neutral,
sanitizing solution.
•
Never store the screen while it is wet. Allow
it
to dry before rolling it
up,
or risk the growth of mildew
or other bacteria.
5
Advertisement
Table of Contents
