Safety Precautions; Setup - Kodak Large Inflatable Screen User Manual

Table of Contents

Advertisement

3. SAFETY PRECAUTIONS
• This product should only be installed by an adult. Keep all electrica
l
parts away from chi ldren.
Keep all electrical
lines, radios,
speakers and other electrical devices away from the inflatable screen
and the air pump or risk serious electric shock.
Do not place the screen near or under overhead electrical lines or risk serious electric shock.
Do not immerse the screen or air pump in water.
• The air pump is a high volume
device,
and is capable of moving a lot of air very quickly. When using
the air
pump,
keep in mind the following:
- Place the air pump in an area where it will not suck in dirt or leaves.
- Keep away from water.
- Keep away from high-traffic areas.
- Keep away from children.
Only use the provided air pump for inflation
The air pump is not a toy. It should only be used under the direct supervision of a competent adult.
This product is intended for domestic and outdoor use
only.
When in
use,
adult supervision is required
.
Keep all parts away from open flames and other heat sources.
Do not attach or leave any items on/inside the product.
Do not jump off of or onto the product.
Do not use this product in public areas or as a rental.
Do not use in windy
conditions.
Do not leave the product out in the rain
.
Do not open or try to service the air
pump.
If the air pump needs servicing, take it to a
qualified professional.
Clearly mark the path of the power cord to avoid tripping and/or damage by yard equipment such
as lawn
mowers, etc.
Do not leave air pump unattended.
Do not cover the air intakes when the air pump is being used and do not insert smal
l
objects into
any part of the air pump.
We do not recommend using extension cords with this product.
Disconnect the air pump from the power source when moving the screen.
To reduce the risk of fire or electric shock, do not use the air pump with any solid-state speed
control device.
Securely stake the air pump and screen into the ground before use.
4. SETUP
1. Remove the screen and all other parts from the box, making sure t he parts in the box
match
t hose
listed in the Parts section of this manual.
2. Connect the white screen to the inflatable frame by connect ing the attached buckles.
3. Unroll and unfold the screen body in the center of the area w here you would like to use it.
4

Advertisement

Table of Contents
loading

Table of Contents