Thermo Scientific PrintMate AS Operator's Manual page 41


Remove finger from the Loading Slot and allow the Cassettes to fall into position as shown.

The Cassette Tube should sit on a step about half-way down the Hopper as shown.
Failure to ensure Cassettes are properly loaded can cause the hopper to jam.
Ensure that the end of the Cassette Tube is not damaged or deformed as this may cause jams.
Note
When loading Cassette Tubes into Hoppers that are not attached to the Carousel, it is possible to fit the Hopper
with the Tube upside down to avoid the risk of spilling the Cassettes out of the Tube.
Chapter 3 - Basic Operation
33