Thermo Scientific PrintMate AS Operator's Manual page 40

PrintMate AS A83810100 Issue 2

Unpack a Tube of Cassettes and remove the End-Cap as shown.
Note
Ensure the Cassette Tube is oriented as shown to avoid the Cassettes spilling out of the Tube.

Use a finger to hold the Cassettes in the Tube and then turn it upside down so that the open end of the Tube
is at the bottom.

Lower the Tube into the open top of the Hopper, being sure to keep a finger on the bottom for as long as
possible; there is a Loading Slot provided for this purpose.
32