Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Soluna 15K PACK HV
Summary of Contents for Soluna 15K PACK HV
- Page 1 Lithium Battery Pack SOLUNA 15K Pack HV Suitable for indoor installation Soluna Australia Pty Ltd ACN 634 963 296 October 2020 Version 1.2 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 1 of 25 Published date: November 2020...
-
Page 2: About This Manual
About this manual This manual describes how to install the Soluna 15K PACK HV battery system (hereafter referred to as ‘the BS’). Please read the manual in its entirety before installing the BS and follow all instructions throughout the installation process. -
Page 3: Table Of Contents
Consumer ‘Start up’ and ‘Shut down’ procedure ____________________________________________ 22 Care and maintenance __________________________________________________________________ 24 Firmware upgrade Troubleshooting _______________________________________________________________________ 25 Contact us ____________________________________________________________________________ 25 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 3 of 25 Published date: November 2020... -
Page 4: Safety Precautions
The BS should be recycled, not be disposed of with household waste, at the end of its working life. For more information, contact Soluna Australia. There is a risk of physical injury or damage to the BS if the installation requirements are not followed and/or the BS is handled incorrectly. -
Page 5: Safety Instructions
Do not subject the BS to any strong force. Do not insert foreign objects into any part of the BS. Do not use solvents to clean the BS. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 5 of 25... -
Page 6: Response To Emergency Situations
Response to emergency situations The Soluna 15K PACK HV BS comprises multiple batteries that are designed in such a way as to prevent hazards resulting from failures. However, Soluna Australia cannot guarantee the absolute safety of the BS. Leaking batteries If the BS leaks electrolyte, avoid contact with the leaking liquid or gas. -
Page 7: Accredited Installers
Safety gear Wear the following safety gear when dealing with the BS. Item Photo Name Insulated gloves Safety goggles Safety shoes 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 7 of 25 Published date: November 2020... -
Page 8: Product Introduction
2. Product introduction The Soluna 15K PACK HV is an NCM lithium battery product with a battery management system (‘BMS’). This high-voltage BS features CAN communication, under-voltage, over- voltage, over-current, over-temperature and under-temperature protection functions. It is characterised by high energy density, long life, safety and reliability and is environmentally sustainable. -
Page 9: Packing List
Note: retain packaging for future storage or transportation. Packing list The following table lists the numbers of each item included. If anything is damaged or missing, contact Soluna Australia or your distributor. Item Name Remark... - Page 10 All tools should be properly insulated to prevent an accidental electric shock or short circuits. Use adjustable tools and measuring instruments that are certified for precision and accuracy. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 10 of 25...
-
Page 11: Outline Dimensions (Mm)
Figure 2.1 – outline dimensions. Depth Width Width (mm) 654 ±2 Depth (mm) 227 ±2 Height (mm) 1205 ±3 Weight (kg) 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 11 of 25 Published date: November 2020... -
Page 12: Technical Data
Reliability and certification Certificates Cell – UL1642; Battery – IEC62619 & UL1973 Hazardous materials classification Class 9 Transportation UN38.3 Ingress rating IP54 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 12 of 25 Published date: November 2020... -
Page 13: Appearance
Name Remark ① Cable entry ② Power ON/OFF ③ Upper handle ④ Lower handle ⑤ Grounding ⑥ Grounding ⑦ Power light 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 13 of 25 Published date: November 2020... -
Page 14: Wiring Port
Wiring port The wiring port of the Soluna 15K PACK HV can be seen once the cover cap has been opened (see diagram below for details). Figure 2.3 – Wiring port. Number Name Remark ① CAN1 port For external communication (inverter) ②... -
Page 15: Installation
Note: for detailed requirements in relation to the width of the maintenance channel, escape routes, etc., refer to applicable standards for the country/region in which the BS is to be installed. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 15 of 25... -
Page 16: Installation Requirements
Installation requirements The Soluna 15K Pack HV should be installed against a wall, with eight holes drilled into that wall to fix the racks of the BS. See the following diagram for details. Step 2: screw the bracket to the wall Step 3: install the battery module. - Page 17 — — CAN 2H CAN 2L Note: CAN 1H/CAN 1L used for external communication; CAN 2H/CAN 2L used for internal communication. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 17 of 25 Published date: November 2020...
- Page 18 Electrical connection Please refer to the following for details. Preparation 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 18 of 25 Published date: November 2020...
- Page 19 Bind with insulating tape. Width of insulating tape – 12 mm±2; Apply two turns of insulating tape. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 19 of 25 Published date: November 2020...
- Page 20 Lock power cable with a Phillips screwdriver (M5). Step 4. Lock the cover. Lock cover with a hexagon wrench (2.5 mm) 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 20 of 25 Published date: November 2020...
- Page 21 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 21 of 25 Published date: November 2020...
-
Page 22: Consumer 'Start Up' And 'Shut Down' Procedure
To shut down the BS, push the breaker down. Note: CAN 1 is connected to the inverter for communication. 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 22 of 25 Published date: November 2020... - Page 23 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 23 of 25 Published date: November 2020...
-
Page 24: Care And Maintenance
5. Care and maintenance Keep the area around the BS clear of debris. The Soluna 15K Pack HV BS does not require pre-scheduled preventative maintenance – it is not designed to be opened. The unit will be replaced if a failure is diagnosed. -
Page 25: Firmware Upgrade Troubleshooting
If you have any questions, please contact us. Soluna Australia 1/677 Murray Street, Perth WA 6005 Phone 1300 126 888 Email info@soluna.com.au www.soluna.com.au 15K Pack HV Installation Manual © 2020 Soluna Australia Pty Ltd Page 25 of 25 Published date: November 2020...
Need help?
Do you have a question about the 15K PACK HV and is the answer not in the manual?
Questions and answers