RM-994/ RM-995/ RM-996
System Module
External earpiece and microphone
The AHJ headset earpiece is connected to WCD9304 (U2100) which is used for high quality audio output
and to guarantee long playback time for accessory use.
AHJ connector
The AHJ connector handles both audio and video signals output. It has audio left and right signals
separately
(Pins 5 and 3) and the microphone signal wired to pin 1.
Figure 52 AHJ connector pole positions
Figure 53 AHJ connector diagram
The plug detection signal handles the AHJ connector plug detection with HSJ_DET signal from MSM8930/
8230 at GPIO_37.
NOKIA INTERNAL USE ONLY
Page 149
Copyright © 2013 Nokia. All rights reserved.