Service Menu Overview - SystemAir CD Control Panel Service Menu

3 Service menu Overview

Enter the service menu by selecting the service symbol in the display.
Below overview displays the service menu structure in 3 levels.
Menu level 1 Menu level 2
Service Password
→Password
Password XXXX
Locked YES/NO
Service Change password
→Change password
Actual XXXX
Filter period New XXXX
Time/Date Confirm XXXX
Service Filter period
Change password Reset:
→Filter period
Time to replace 9
month
Time/Date
Service
Time/Date YY/MM/DD
Change password
Date:
Filter period
Time:
→Time/Date
Weekday:
Service
Ext/Forc Run
→Ext/Forc Run
Minutes:
Week program
Fan speed:
Nominal
Fan speed log
Service Week program
Ext/Forc Run Week program
→Week program
Fan speed
Fan speed log
CD Control panel
D2074870
Menu level 3
NO
10/05/08
10:00
SAT
0
Week program
Day MON
Per1: 07:00 16:00
Per2: 00:00 00:00
Fan speed
ON level:
Low/Nom/High
OFF level:
OFF/Low/Nom/High
3
Explanation
Enter the service level by typing 1111. Use
the selection knob for each digit and confirm
with the confirm button after each set digit.
Set new password if necessary.
In case the new password would be forgotten
or misplaced it's still possible to enter the
service level by writing 8642. This overrides
the earlier set password.
Shows selected time interval between filter
change.
Set Reset of the filter period to YES after
completed filter change.
Set time between filter changes.
Shows current set date and time.
Set Correct date and time.
Use this dialogue frame to program extended
time you want the unit to work under
operation conditions other than determined
by the week schedule.
Shows set time for extended/forced running.
Shows Set fan speed.
Set the time in minutes the unit is to run in
extended/forced running mode.
Set the fan speed for this mode. Choose
between Low, Nom or High. Default is Nom.
Program how you want the unit to operate
according to the week schedule. It's possible
to set 2 periods per day.
Set week day and time interval for the time
you want the unit to be in ON mode.
Use this dialogue frame to determine the
ON and OFF speed for the fans in the week
schedule.
Set ON level.
Choose between Low, Nom or High. Default
is Nom
Set OFF level.
Choose between OFF, Low, Nom or High.
Default is Low.
Service Menu
Systemair AB