Table of Contents
Advertisement
Quick Links
INDUSTRIAL PC
COPILOT 21.5''
2E00xxxx*
Order Code:
Date: 11/2020 - Rev: 1.8
* The order code of the PC is specifi c to each specifi c confi guration defi ned by the Customer.
system-electronics.it
USER MANUAL
1. General Features........................................3
2. Technical Specifi cations.................................................3
3. Description and operation...........................3
4. Installation..................................................................3
4.1
4.3 Panel mounting.............................................5
4.4 Mounting option with foot..............................6
5. Touch screen: operation and calibration...............7
5.1 Touch screen calibration.................................7
5.2
5.3
5.4
6. External connectors available.......................................9
6.1
7. Optional kits...........................................10
7.1
7.2
8. Available connectors...........................................13
8.2 Ethernet RJ45...............................................13
8.3 USB....................................................................13
8.4 24V power supply..........................................13
tive and use of hazardous substances................14
Confi guration of internal connectors..............3
Adjusting display brightness.............7
Touch screen-cleaning......................8
...............................9
...............................10
SUMMARY
parameters....7
...........11
Advertisement
Table of Contents
Related Manuals for SYSTEM Electronics COPILOT 21.5
Summary of Contents for SYSTEM Electronics COPILOT 21.5
-
Page 1: Table Of Contents
INDUSTRIAL PC USER MANUAL COPILOT 21.5’’ SUMMARY 1. General Features........3 2. Technical Specifi cations..........3 3. Description and operation......3 4. Installation..............3 Confi guration of internal connectors....3 4.2 Hanging version installation (VESA100)..4 4.3 Panel mounting..........5 4.4 Mounting option with foot......6 5. Touch screen: operation and calibration....7 5.1 Touch screen calibration.........7... - Page 2 Industrial PC- COPILOT 21.5" Revision History Pages Rev. Writing Rev. Changes par. 5.1 and 5.2 Rev. Added chap. 7 Rev. Updating Rev. Updating Rev. Updating Rev. Changed chap. 6-7-8 Rev. Kit added. UPS and Arm Kit. Rev. Added touch-screen cleaning...
-
Page 3: General Features
Mounting: Arm / Panel Made of stainless steel, resistant to dust and liquids, Power supply: 24 Vdc Copilot 21.5'' is a PC solution adaptable to all the needs of the latest generation industrial machines. Temperature: 0°C +50°C The 1920x1080 FullHD graphic display allows the display (Max +60°C cooled version) -
Page 4: Hanging Version Installation (Vesa100)
Place the Copilot 21.5'' on the VESA arm by inserting all cables inside from the rear center hole- It is possible to fix the Copilot 21.5'' to the arm using the M6 screws supplied as in the picture. In case the... -
Page 5: Panel Mounting
4.3 Panel mounting Drilling the panel according to the dimensions indicated: 320 x 528 Figure 4.2.2: How the Copilot 21.5" appears after being atta- ched to the Vesa100. Only then connect the communication cables to the VESA arm: USB, Ethernet, RS232 are all located on the bottom side. -
Page 6: Mounting Option With Foot
Secure the Copilot using the adjustable side blocks. Wiring the connection cables Refit the upper and lower sides with the 6 M5 screws and fix the Copilot 21.5'' to the panel using the screws provided. Figure 4.3.4: Copilot 21.5" panel mounted. November 2020 - Rev. 1.8 Order code 2E00xxxx pag. -
Page 7: Touch Screen: Operation And Calibration
5.1 Touch screen calibration: To reset the factory settings again, select the "RESET" button from the TABLET PC SETTING window The Copilot 21.5" PC does not normally require ca- libration procedures, as it is already optimized during production. If you need to optimize the calibration of the touch screen, follow the procedure below In the Tablet PC Settings section, press the "CALIBRATE"... -
Page 8: Touch Screen-Cleaning
After cleaning the surface of the touch screen, wipe it dry carefully with a dry cloth, removing the more System Electronics rende disponibili dei tools e degli possible the sanitizing solution. esempi per poter regolare la luminosità del display da remoto, tipicamente da un pc supervisore tramite la comunicazione ethernet è... -
Page 9: External Connectors Available
6. External connectors Several options that can be ordered: available Copilot 21.5'' is customizable with different modules to adapt to the needs of the industrial world: by replacing the bottom lock you can add buttons and keyboard, or 6.1 Optional types both. -
Page 10: Optional Kits
UPS-SUPERCAP uninterruptible power supply, throu- gh the use of 4 2.7V 2-layer 2.7V capacitors, allows the Copilot 21.5" to be kept on in case the power supply in the industry should be missing leading to the safe shut- down of the PC avoiding voltage surges or sudden stops. -
Page 11: Vesa100 Rubber Kit Shock Absorbed Arm
Industrial PC- COPILOT 21.5" 7.2 Vesa100 Rubber Kit Shock Absorbed Arm • 1 x RUBBER GASKET 135X135 SP=10 • 4 x T.C.E.I. screw M6X25 UNI 5931 A2 • 4 x DISTANCE OF=6.5 DE=10 L=8 INOX 7.2.1 KIT COMPOSITION (Cod.2E001142) •... - Page 12 Industrial PC- COPILOT 21.5" 7.2.2 ASSEMBLY OF KIT (Cod.2E001142) INSERT THE 4 SPACERS IN THE VESA100 HOLES OF THE RUBBER GASKET CONNECT THE CABLES BEFORE ATTACHING THE ARM, REMOVING THE BOTTOM PLATE. FIX THE ARM WITH THE 4 SCREWS CONTAINED IN THE KIT.
-
Page 13: Available Connectors
Industrial PC- COPILOT 21.5" 8. Available 8.2 Ethernet RJ45 connectors • 1 • 2 • 3 8.1 Signal Input Analog RGB, • 4 TP2+ • 5 TMSD (DVI) TP2- • 6 • 7 TP3+ 8 7 6 5 4 3 2 1 •... -
Page 14: Waste Electrical And Electronic Equipment Direc- Tive And Use Of Hazardous Substances
Industrial PC- COPILOT 21.5" 9 . W a s t e E l e c t r i c a l a n d E l e c t r o n i c Equipment (WEEE) and Use of Hazardous...
Need help?
Do you have a question about the COPILOT 21.5 and is the answer not in the manual?
Questions and answers