Page 2
Do not use the overbed table if its construction or casters have been damaged because this could cause loss of stability. Do not sit or lean on the overbed table. Doing so may cause the table to tip which may result in personal injury, or in damage to the table.
Page 3
Raising the Overbed Table To raise the overbed table, lift up on the underside of the top surface. The activation handle does not need to be used for this operation. Lowering the Overbed Table First engage the activation handle by pushing it against the table, then apply downward pressure on the top surface.
Page 4
MedViron Overbed Tables can withstand a wide range of hospital cleaners and disinfectants. Follow the cleaning solution manufacturer’s instructions when using these products. The CDC recommends using a 5.25% - 6.15% sodium hypochlorite chlorinated bleach solution (i.e., household bleach) diluted 1:100...
Page 5
Warning: Do not attempt in any way to alter, adjust, or lubricate the internal contents of the column, including gas spring and mechanisms. Doing so will void any related warranty and may cause permanent damage to the overbed table. MedViron | 9680 Pentatech Drive, Zeeland, Michigan 49464 USA | 1-844-medviron | medviron.com...
Page 6
29” / 46” (74cm / 1.17m) Base Height 2.2” (5.6cm) ***Warning: Loading the overbed table beyond the safe working load could result in injury, or cause damage to the overbed table. Preventative Maintenance Preventative maintenance is recommended at a minimum of once per year.
Page 7
Maintenance Log Serial Number Date completed Completed by MedViron | 9680 Pentatech Drive, Zeeland, Michigan 49464 USA | 1-844-medviron | medviron.com...
Page 8
Zeeland, MI 49464 USA Serial Number Required! Your MedViron Overbed Table serial number is required for all written and verbal communication. The serial number is located on the metal plate supporting the overbed table top. MedViron | 9680 Pentatech Drive, Zeeland, Michigan 49464 USA | 1-844-medviron | medviron.com...
Need help?
Do you have a question about the Overbed Table and is the answer not in the manual?
Questions and answers