Advertisement
Assembly Instructions
Tools required for assembling:
Two 13-17 open-end wrenches, one 5# socket head wrench and one 6# socket head
wrench.
Remarks: to avoid injury, two or more persons are required for assembling the
equipment.
Step 1
A).
Place Item 1 and Item 3 as shown in the figure, and fix Item 3 on Item 1 with
the bolt (Item 25), flat gasket (Item 31) and nylon nut (Item 32);
B).
Insert Item 7 into Item 4 as shown in the figure, and fix Item 7 on Item 4 with
the bolt (Item 24); Insert Item 4 (assembled) into Item 3 as shown in the figure,
and fix it with the bolt (Item 30);
C).
Connect Item 2 and Item 4 as shown in the figure, lead the bolt (Item 25)
through Item 2, and then assemble the flat gasket (Item 31) and tighten it with
the nylon nut (Item 32);
D).
Tighten all bolts with the wrench after they are connected.
4
Advertisement
