Connect the CT210 or DS100 to the Self/Proj side of the IQS213AEV02 EV-Kit. The IQS213A GUI looks as follow: Figure 3.1 IQS213 GUI This is version V1.0.0.140 available from the Azoteq website. Click here to go to the GUI download page. Install and run the software.
4.1 Prototype Board This is basically a breakout board for the module board. Plug a module board into the Prototype board and configure it with the Azoteq USBProg software program available from the Azoteq website. Please Note: Fuse bits can only be programmed once! Here is an example of how the USBProg software looks like.
Page 9
Azoteq makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Azoteq products are not authorized for use as critical components in life support devices or systems. No licenses to patents are granted, implicitly, express or implied, by estoppel or otherwise, under any intellectual property rights.
Need help?
Do you have a question about the IQ Switch ProxSense Series and is the answer not in the manual?
Questions and answers