Technical Data Flash Head; Initial Operation; Set-Up And Assembly; Adjustment Of The Tilting Head - Priolite M-PACK 500 Instruction Manual

Instruction manual PRIOLITE M-PACK 500 / M-PACK 1000 (HS) + PRIO HEAD 1000
Technical data
Modeling lamp:
Color temperature (K):
Weight (without tilt):
Dimensions (cm x cm):
Code No.:
Initial operation.

Set-up and assembly

For power packs, use the following options for transportation / operation:
1) Standing upright on firm, dry ground with the flash socket on top
2) Clamped to a tripod using a combination of Manfrotto Superclamp and PRIOLITE tilting
head (accessories not included in the standard delivery). The PRIOLITE tilt head is thus
inserted into the rail profiIe of the generator and securely locked using the small lateral
wing screw. The Manfrotto Superclamp mounted on a tripod now takes the stand mount
of the PRIOLITE tilt head. Hereby, the generator serves as a weight loading on the
stand. Depending on the mounting height the power pack can be operated easily from
waist height.
3) The power pack can be stored for transportation purposes in the PRIOLITE gear tube
(accessories not included in the standard delivery) hanging around the shoulder. In the
gear tube, the power pack must only be operated at low power levels to avoid heat
problems.
The flash head is equipped as standard with a tilting head. For set-up on tripods,
pantographs or ceiling systems, this is screwed securely onto the appropriate tripod mount
using the locking thumbscrew on the side of the panner.
If the units are suspended from pantographs, ceiling rails, or extended stands, a
second secure connection is required in accordance with the applicable safety
regulations. It is recommended to insert a steel cable suitable for this purpose (not
included) through the opening of the handle and to secure it to a suitable lug on the
suspension unit.

Adjustment of the tilting head

Dependent on the direction the tilting head is inserted into the rail profile, right and left hand
use is possible. You have the following options for adjusting the flash unit:
The inclination angle can be precisely adjusted by means of the large thumbscrew. The
◊
rotation angle (360 °) is set using the tripod mounting screw.
PRIO HEAD 1000
LED array (equivalent to 80W halogen)
5500
1,2 kg
21 x 17
05-1000-01
PRIOLITE GmbH Wuerzburg - Last revised: 08/2014 - Page 8
.