Add A Local App In The Tv - Philips Professional HFL5014/12 Series Installation Manual

After you [Apply], you will see the Terms and Conditions that you have to sign.
Once you [Confirm], you will receive a confirmation email that you have to confirm in order to
be approved.
Once approved you will see below status indicating that you are authorized. You can still [Re-
read the T&C]
7.2.4

Add a local app in the TV

Once you have configured your TV you can also add your own local app. This is an app that is locally
installed in TV and not part of the app control.
This can be done via CMND where you can upload your local apk to be installed or load directly via USB
in the clone. When you use CMND to load the app, CMND will create the json file.
You can afterwards download it to USB to see how json file exactly looks like.
If you want to manually install the local app, the app should be added in the
/MasterCloneData/AndroidApps/ folder and you should adapt the AndroidAppsMetaData.json file
accordingly.
In the json file you will see that the "packageType": "local". All other parameters will be adapted on
you current setup as already available in CMND.
For example:
{
"packageName":"com.android.myapp",
"packageURI":"./myapp.apk",
"silentAction":"install",
"packageType":"local",
"packagePosition":10,
"packageShowHide":"1",
"packageCountry":[
"ALL"
],
"packageCategory":[
"Other"
- 94 -