Delete A Preset; Use "Save As" To Save Current Changes To A Preset As Another Preset; Update Firmware And Manage Preset Files; Install New Firmware - 1010music Toolbox User Manual

Delete a Preset

Follow these steps to delete a preset. Warning: there is no undo, and no prompt to ask "are you sure?" So make
sure you are on the correct preset before you use this. If you do accidentally delete a factory preset, you can reload it
from the factory image using the steps outlined in Update Firmware and Manage Preset Files below.
1. Touch the button at the top of the
Edit
2. Use a Control Knob to select the preset you want to delete, and then touch the
preset is immediately deleted.

Use "Save As" to Save Current Changes to a Preset as Another Preset

You can save your work on a current preset as either a new preset or overwriting a different existing preset:
1. Touch the Preset Name to display the Preset Selection screen.
2. Touch to display the Edit sub-menu.
Edit
3. Touch
SaveAs.
button to save the changes and go back to the
return

Update Firmware and Manage Preset Files

Toolbox owners can update the module's firmware to get the latest features and other updates. Toolbox is not cross
compatible with the Series 1 Modules, bitbox, fxbox and synthbox. The firmware can be updated with the factory
image, which includes the original presets, or just the firmware itself. You can also choose individual presets to copy
over to your microSD Card

Install New Firmware

Here are the steps required:
1. Download the toolbox firmware onto your computer. You can find the latest firmware image in the Firmware
Downloads sub-forums at https://forum.1010music.com. NOTE: You must be a registered member of the
forum in order to access the firmware download sub-forums.
2. Unpack the zip file. Some browsers do this automatically for you.
3. If you want to replace the Presets with the factory image, copy the full contents of the zip file onto a
microSD card. If you do not want to overwrite your presets, copy only the Series2.bin file to the microSD
card. Place the microSD card in your toolbox.
4. While powering up the unit, hold the Home and Info buttons. When you see the message about upgrading
the firmware, you can let go.
5. When the upgrade finishes in about 15 seconds, the unit will restart with the new software.
NOTE:
You must register at forum.1010music.com in order to download firmware.
•
You cannot run bitbox, fxbox or synthbox firmware on a toolbox module.
•
You cannot run toolbox firmware on a bitbox, fxbox or synthbox module.
•
The microSD card must be formatted with FAT32. The exFAT format will not work.
•

Backup and Restore Your Presets

It is always a good idea to keep a backup of your work. You can backup the preset files that are stored on the
microSD card by following these simple steps:
1. Remove the microSD card from your module and insert into your computer. You may need to use a
microSD adapter.
2. Copy the files from the microSD card onto your computer.
To restore one or more preset files from a backup, simply copy the preset file from the backup copy onto the
microSD card. You may rename the files.
11/23/17 10:32 AM
Presets
Toolbox displays a touch screen keyboard you can use to enter a new name. Touch the
Digital Heart – Analog Soul
Toolbox User Manual
screen to display the
Edit
screen.
Presets
Copyright 1010music LLC 2017
submenu.
button. The
Delete
P. 15