Getting Started; Contacting A Service Center; Safety Information: Read First - Fluke 125 Getting Started

Introduction
This Getting Started Manual provides basic information
on the Fluke 125 ScopeMeter Test Tool. For complete
operating instructions, refer to the Users Manual on the
accompanying CD-ROM

Contacting a Service Center

To locate a Fluke authorized service center, visit us on
the World Wide Web at: www.fluke.com
or call Fluke using any of the phone numbers listed
below:
+1-888-993-5853 in the U.S.A and Canada
+31-40-2675200 in Europe
+1-425-446-5500 from other countries.

Getting Started

Safety Information: Read First

The Fluke 125 ScopeMeter Test Tool (hereafter referred
to as "Test Tool") complies with:
•
ANSI/ISA-82.02.01
•
EN/IEC 61010-1: 2001 600 V Measurement
Category III, Pollution Degree 2
•
CAN/CSA-C22.2 No.61010-1-04 (including
CSA approval)
C US
Use the Test Tool only as specified in the Users Manual.
Otherwise, the protection provided by the Test Tool might
be impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user. A Caution identifies conditions and
actions that may damage the Test Tool.
1