High Bit Error Rate; Welding Operation Guidance; Reflow Temperature - Ebyte E107-SC01 Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd

High bit error rate

8.3
There are co-channel signal interference nearby, keep away from interference sources or modify frequency, channel

to avoid interference.
Unsatisfactory power supply may also cause garbled characters, and ensure the reliability of the power supply.

If the extension cable or feeder is of poor quality or too long, the bit error rate will be high.


9. Welding operation guidance

9.1 Reflow temperature

Profile Feature
Solder Paste
Preheat Temperature min （Tsmin）
Preheat temperature max (Tsmax)
Preheat Time (Tsmin to Tsmax)(ts)
Average ramp-up rate(Tsmax to Tp)
Liquidous Temperature (TL)
Time（tL）Maintained Above（TL）
Peak temperature（Tp）
Aveage ramp-down rate（Tp to
Copyright ©2012–2019，成都亿佰特电子科技有限公司
Curve feature
Solder paste
Mini.preheating
temperature
Max. preheating
temperature
Preheating
temperature
Average Rising
Rate
Liquid phase
temperature
Time above
liquidus
Peak
Temperature
Average Decline
E107-SC01User manual
Sn-Pb Assembly Pb-Free Assembly
Sn63/Pb37 Sn96.5/Ag3/Cu0.5
100℃ 150℃
150℃ 200℃
60-120 sec 60-120 sec
3℃/second max 3℃/second max
183℃ 217℃
60-90 sec 30-90 sec
220-235℃ 230-250℃
6℃/second max 6℃/second max
7-11