SnowEx 6800LT Owner's Manual page 40

Smooth Stop/Soft Stop
The control automatically allows the blade to coast
to a stop when the lever returns to center position.
This results in smoother operation, reduces the
shock to the hydraulic system, and increases
hose and valve life. See "FLEET FLEX Electrical
System" in this section for more information.
Control Lever Movement
From the center position, the control lever can be
moved in one of eight directions to control various
movements of the snowplow blade. To change
from one movement of the blade to another, the
control lever must be moved back to the center
position before selecting the desired function.
Whenever the lever is released, it should spring
back into the center position to stop any blade
movement.
Lit. No. 72448, Rev. 02
OPERATING YOUR SNOWPLOW
Control Functions
RAISE, LOWER, FLOAT, Angle
Moving the control lever straight up and down or
from side to side on the control body will result in
the blade movements described in the following
tables.
ON/OFF
RAISE
1
L
3
LOWER
42
FLOAT
FLOAT Light
(green)
2
R
4
March 1, 2020