National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual page 139

Appendix A Specifications
Electromagnetic Compatibility
For EMC declarations and certifications, refer to the Online Product Certification
Note
section.
Note For EMC compliance, operate this device with shielded cables and accessories.
CE Compliance
Online Product Certification
Environmental Management
NI-FBUS Hardware and Software User Manual
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
To obtain product certifications and the Declaration of Conformity (DoC)
for this product, visit
ni.com/certification
or product line, and click the appropriate link in the Certification column.
NI is committed to designing and manufacturing products in an
environmentally responsible manner. NI recognizes that eliminating certain
hazardous substances from our products is beneficial to the environment
and to NI customers.
For additional environmental information, refer to the NI and the
Environment Web page at
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
ni.com/environment
A-12
, search by model number
. This page contains the
ni.com