National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual page 129

Appendix A Specifications
Safety
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Electromagnetic Compatibility
For EMC declarations and certifications, refer to the Online Product Certification
Note
section.
Note For EMC compliance, operate this device with shielded cables and accessories.
CE Compliance
Online Product Certification
NI-FBUS Hardware and Software User Manual
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
• IEC 60950-1, EN 60950-1
• UL 60950-1, CSA 60950-1
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
To obtain product certifications and the Declaration of Conformity (DoC)
for this product, visit
ni.com/certification
or product line, and click the appropriate link in the Certification column.
A-2
, search by model number
ni.com