Yamaha HUB Owner's Manual page 23

23
ACU Pages
Mode indicator:
REO, PARALLEL, or BRIDGE.
ATT fader:
the fader is the current attenuation setting in dB. Attenuation can also be set by clicking the
Up and Down arrow buttons, or by entering a value from the keyboard.
Phase button:
Reversed.
Mute button:
Output meter:
of volts (see preference on
triangle indicates the warning threshold specified on the Threshold page (see
Input meter:
value is the current input level.
Temperature:
grade or Fahrenheit (see preference on
ture. The maximum temperature is displayed graphically by the green triangle at the right
of the meter, and numerically by the Max hold value. To reset the max hold, right-click the
meter and choose "Reset temp hold on this channel" or "Reset temp hold on all channels"
from the pop-up menu.
Load impedance:
load impedance.
NetworkAmp Manager—Owner's Manual
This displays the power amplifier mode for each pair of channels: STE-
This fader attenuates the channel's input signal. The numerical value below
This button is used to set the channel's input signal phase: Normal or
This button is used to mute the channel.
This 12-segment meter displays the channel's output level in either watts
page 8). The Present value is the current output level. The yellow
This 12-segment meter displays the channel's input level in dB. The Present
This 12-segment meter displays the channel's temperature in either centi-
This is the channel's load impedance. The Present value is the current
page 8). The Present value is the current tempera-
page 24).