Yamaha RX-V559 Owner's Manual page 36

PLAYBACK
5
Rotate VOLUME on the front panel (or press
VOLUME +/– on the remote control) to adjust
the volume to the desired output level.
VOLUME
Front panel
6
Press TONE CONTROL on the front panel
repeatedly to select "TREBLE" or "BASS"
and then rotate the PROGRAM selector to
adjust the corresponding frequency
response level.
TONE CONTROL
DVR V-AUX
SP
A
TREBLE
• Select "TREBLE" to adjust the high-frequency
response.
• Select "BASS" to adjust the low-frequency
response.
Notes
• Speaker and headphone adjustments are stored
independently.
• When "TONE BYPASS" is set to "AUTO" (see page 82),
and "BASS" and "TREBLE" are set to 0 dB, audio output
automatically bypasses the tone control circuitry of this
unit.
• If you increase or decrease the high-frequency or low-
frequency sound to an extreme level, the tonal quality of
the surround speakers may not match that of the front left
and right speakers.
• TONE CONTROL is not effective when the "DIRECT
STEREO" mode (see page 38) is selected or when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 37).
• To enjoy multi-channel sources in surround, see page 41
for details.
32
or
VOLUME
Remote control
PROGRAM
pDVD
DTV/CBL MD/CD-R TUNER CD XM
VOLUME
0dB
L
7
Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the OSD.
See page 64 for details about sound field programs.
STEREO
STANDARD
SPEAKERS
dB
R
Notes
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
• Sound field programs cannot be selected when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 37).
• Sampling frequencies higher than 48 kHz (except for DTS
96/24 signals) are sampled down to 48 kHz and then sound
field programs are applied.
• To display information about the currently selected input
source in the OSD, see page 39 for details.
PROGRAM
Front panel
or
MUSIC ENTERTAIN MOVIE
1 2 3 4
DIRECT ST.
SELECT EXTD SUR.
5 6 7 8
ENHANCER
NIGHT STRAIGHT
9 0 10 ENT.
EFFECT
Remote control
pDVD
V-AUX DTV/CBL MD/CD-R TUNER
DVR
SP
A
TV Sports
Currently selected
surround field program
CD XM
VOLUME
dB
L R