Table of Contents
Advertisement
Sometimes network problems can cause a view cell to be attempting to connect to a network
camera. If the connection attempt takes a long time, it may result from network problems or
incorrect configuration with video streaming. For example, you may have configured the camera
to be streaming a 5MP stream. The NVR uses video stream #1 for recording, and stream #2
from cameras for live viewing. You should then open an individual web console to the network
camera to change its video streaming configuration.
If the current layout already contain the max. number of cameras, e.g., 16 for the ND9441, the
following message will prompt.
If you are using the 16-CH ND9441, there can be more than 16 view cells across multiple layout
pages, e.g., on the second page of the 1M+12 layout. Placing a camera in the 17th to 18th view
cells will bring out the following message.
VIVOTEK - Built with Reliability
User's Manual - 17
Advertisement
Table of Contents
