Emergency Towing - GAC GA4 Manual

8. Handling of Accident

8.7 Emergency Towing

The front and rear parts of the vehicle are both
provided with emergency traction port of threaded
hole structure, to which the towing hook (a vehicle
tool) can be installed for traction operation.
Hint
The towing hook shall be placed on the vehicle
so as to be used when needed.
Warning
The emergency traction operation of the
vehicle has certain risk. Unless you have the
experience, do not tow other vehicle to avoid
accidents.
350
Install Front Towing Hook
– Take out the towing hook and the wrench for
removing wheel bolts from the tool bag in the
trunk.
– Open the towing hook cover with a word knife
at the position indicated by the arrow.
– Screw the towing hook ① into the threaded
hole clockwise.
– Insert the wrench for removing wheel bolts ②
into the towing hook port, and rotate the
wrench clockwise to securely screw the towing
hook into the threaded hole.
– After towing, screw out the towing ring in
reverse sequence and put the bumper cover in
place.