Download
Share
Print this page
  1. Manuals
  2. Brands
  3. GAC Manuals
  4. Automobile
  5. emkoo
  6. Manual

GAC EMKOO Manual

Hide thumbs Also See for EMKOO:

Advertisement

Quick Links

Download this manual
Foreword
Thanks for choosing Trumpchi manufactured by GAC Motor Co., Ltd. (hereinafter referred to as "GAC Motor"). For a better driving pleasure, please
read the Owner's Manual carefully. This manual allows you to fully understand the operation methods and precautions of the vehicle. Proper
operation of the vehicle can improve driving safety and prolong the service life of the vehicle.
The Warranty Manual supplied with the vehicle clearly describes the warranty services provided by GAC Motor and the regular maintenance of the
vehicle. Please read this manual carefully to know your rights and responsibilities.
After reading this manual, please store it with the vehicle for future reference.
In case of any doubts about this manual, please contact the GAC Motor authorized shop for detailed explanation.
If you have any suggestions or recommendations, please contact GAC Motor through the customer service hotline: 400-813-6666.
We are grateful for your support and love for Trumpchi. Have a nice drive!
GAC MOTOR CO., LTD.

Advertisement

loading
Need help?

Need help?

Do you have a question about the EMKOO and is the answer not in the manual?

Questions and answers

Related Manuals for GAC EMKOO

Summary of Contents for GAC EMKOO

  • Page 1 Foreword Thanks for choosing Trumpchi manufactured by GAC Motor Co., Ltd. (hereinafter referred to as “GAC Motor”). For a better driving pleasure, please read the Owner’s Manual carefully. This manual allows you to fully understand the operation methods and precautions of the vehicle. Proper operation of the vehicle can improve driving safety and prolong the service life of the vehicle.
  • Page 2 Safety Instructions The safety of you and the passengers is Safety instructions are available in many forms, including: crucial, so driving safely is an important Safety signs - pasted on the vehicle. responsibility of the driver. Safety notes - the texts marked with the symbols and one of the three In order to make clear the safety precautions, words “WARNING”, “CAUTION”, or “NOTE”...
  • Page 3 Table of Contents 1. Important safety precautions ........ 1 4.4.4 Correct installation of child safety seat ...30 4.5 Exhaust gas hazard ..........34 2. Safety precautions for hybrid system ....3 4.6 Safety label ............35 5. Operation of systems and equipment ....36 3.
  • Page 4 Table of Contents 5.4 Lamps and vision ..........85 5.7 AV system ............122 5.4.1 Exterior lamps ..........85 5.7.1 Control buttons on the right of steering wheel ............122 5.4.2 Interior amps ..........90 5.7.2 Basic operation ..........123 5.4.3 Wiper combination switch .......93 5.7.3 Radio ............127 5.4.4...
  • Page 5 Table of Contents 6.3.3 Hill-start hold control (HHC) ......155 6.6 Acoustic vehicle alerting system (AVAS) ..... 219 6.3.4 Hill descent control (HDC) ......155 6.7 Electric power steering (EPS) ......220 6.3.5 Coordinated regenerative braking system 6.8 Driving skills ............221 (CRBS) ............156 6.8.1 Pre-driving safety inspection ......221...
  • Page 6 Table of Contents 7.8 Tire chain ............. 256 8. Technical data ............. 258 8.1 VIN ............... 258 8.2 Dimensions & parameters of vehicle ....260 . 261 lamps ..............264 ..........267 9. Accident handling ..........273 9.1 Driver’s tools and spare tire ......... 273 ........
  • Page 7 1. Important safety precautions 1. Important safety precautions Be sure to fasten the seat belt properly Never drive after drinking ◆ ◆ The seat belt is the best protection device in the event of a collision. Drinking alcohol, even a little, will reduce your response capability, and Airbags are only designed as auxiliaries, rather than replacements, your reaction time after drinking will become longer, so drinking and of the seat belts, so even if the vehicle is equipped with airbags,...
  • Page 8 EDR data disclosure This vehicle is equipped with an event data recorder (EDR). The EDR GAC Motor will not disclose the data recorded in the EDR to third is mainly designed to record data in the event of certain collisions...
  • Page 9 12V low-voltage circuit towing, otherwise, the transmission and is recommended to consult the GAC Motor system. High-voltage direct current and high- drive shaft are likely to be damaged.
  • Page 10 3. Picture index 3. Picture index 3.1 Exterior Front combination lamp Turning on lamps => See page 85 Replacing bulb => See page 251 Specifications of front combination lamp bulb => See page 266 Front wiper Replacing front windshield wiper blade =>...
  • Page 11 3. Picture index Rear combination lamp Specifications of rear combination lamp bulb => See page 266 High-mounted stop lamp => See page 266 => See page 237 Liftgate opening button => See page 73 Rear fog lamp and reverse lamp Specifications of rear fog lamp =>...
  • Page 12 3. Picture index Engine compartment Engine compartment electrical box => See page 279 Oil dipstick => See page 240 => See page 241 => See page 247 Coolant expansion tank of electromechanical coupling cooling system => See page 242 Engine coolant expansion tank =>...
  • Page 13 3. Picture index 3.2 Interior Steering wheel => See page 43 Buttons on steering wheel => See page Driver’s frontal airbag => See page 19 Sun visor => See page 98 Front dome lamp => See page 90 Electric sunshade control button =>...
  • Page 14 3. Picture index Inside handle => See page 65 A/C air outlet => See page 121 Lamplight combination switch => See page 85 Instrument cluster => See page 45 Indicator lamp => See page 55 Wiper combination switch => See page AV system =>...
  • Page 15 3. Picture index Instrument left switch group Exterior rearview mirror folding button* => See page 97 Exterior rearview mirror adjusting button => See page 96 Manual headlamp leveling knob => See page 88 Liftgate button => See page 73 Brake pedal Accelerator pedal A/C control buttons =>...
  • Page 16 3. Picture index Hazard warning lamp switch button => See page 89 START/STOP button => See page 138 P gear button => See page 141 Transmission gearshift lever => See page EPB button => See page 147 Mobile phone wireless charging area* =>...
  • Page 17 4. Instructions for safe operation 4. Instructions for safe operation 4.1 Safe driving The following inspections must be carried out WARNING before driving: 4.1.1 General description Check that all lamps are working properly. W h e n i n s t a l l i n g t h e d r i v e r ’s f l o o r Check that the fuel level is normal.
  • Page 18 4. Instructions for safe operation 4.1.2 Correct sitting posture of Correct sitting posture of the passengers WARNING the driver and passengers To guarantee the safety of the passengers and reduce the risk of casualties, the passengers Correct sitting posture of the driver should: seat in the front passenger’s seat.
  • Page 19 4. Instructions for safe operation 4.2 Seat belt In the event of a collision, the seat belt will Consequences of not fastening the seat belt assist other safety systems in simultaneously absorbing the energy generated by the 4.2.1 Why must you fasten the seat belt by the driver and passengers.
  • Page 20 4. Instructions for safe operation Even if the vehicle speed is very low, the force Rear passengers must also fasten the seat acting on the human body in the event of a belts correctly, otherwise they will be thrown collision is so great that the occupant cannot forward when an accident occurs.
  • Page 21 SRS is failed. In that case, the vehicle START/STOP button is set to “ON” please go to the GAC Motor authorized shop position: belt is fastened correctly, it means that for inspection in time.
  • Page 22 In that tongue is properly locked. the driver or passenger and enable him or case, please contact the GAC Motor her to maintain a correct sitting posture to authorized shop for replacement. NOTE prevent the body from leaning forward.
  • Page 23 4. Instructions for safe operation Unfastening the seat belt Pregnant women must fasten the seat belts WARNING correctly To reduce the risk of injury during emergency braking or accidents, please observe the following precautions: occupants have properly fastened the seat belts. Do not share a seat belt with other persons (including children).
  • Page 24 4. Instructions for safe operation 4.3 Supplemental restraint system (SRS) Depending on vehicle configurations, the deployment positions of the SRS are as shown below: Front seat frontal airbag Front seat side airbag Side curtain airbag (LH SHOWN, RH OPPOSITE). NOTE The airbag will produce a little harmless smoke when deployed, which is normal.
  • Page 25 A system fault is indicated when the GAC Motor authorized shop for indicator lamp is in the following conditions: replacement. The indicator lamp does not come on after the START/STOP button is set to “ON”...
  • Page 26 4. Instructions for safe operation In the event of a frontal collision which is The front seat frontal airbags might not be severe enough to meet the triggering condition triggered in the following cases: of frontal airbag, the frontal airbags will be the vehicle power switch set to “ACC”...
  • Page 27 4. Instructions for safe operation Front seat side airbag The front seat side airbags might not be WARNING triggered in the following cases: the vehicle power switch set to “ACC” or “OFF” position. door side equipped with side airbags 100% frontal collision. during driving.
  • Page 28 4. Instructions for safe operation Side curtain airbag The side curtain airbags might not be triggered in the following cases: the vehicle power switch set to “ACC” or “OFF” position. 100% frontal collision. minor side collision. rear-end collision. other special circumstances. NOTE The word “minor”...
  • Page 29 4. Instructions for safe operation 4.3.1 Cases where the airbags may deploy Hitting of nose to the ground after crossing a deep groove. Collision with roadside protrusions, curbs, etc. Hitting of nose to the ground after running down a steep slope.
  • Page 30 4. Instructions for safe operation 4.3.2 Cases where the airbags might not deploy Collision with concrete pillars, trees or other elongated objects. Rear-end collision with the lower rear end of large truck. Rear-end collision by other vehicles. Collision with a wall or another vehicle, other than frontal collision.
  • Page 31 4. Instructions for safe operation 4.4 Safe ride of children WARNING WARNING 4.4.1 General description The child must sit in a rear seat (2nd row), and restraint system on seats with frontal vehicle! a suitable child safety seat should be selected airbags! for protection according to the body size of the your knees!
  • Page 32 4. Instructions for safe operation 4.4.2 Child safety seat Classification of child safety seats (for reference only): Group 0/0+ child safety seat Suitable for infants weighing less than 13 Group I child safety seat: Suitable for toddlers weighing between 9kg and 18kg. For children weighing up a.
  • Page 33 4. Instructions for safe operation For group I child safety seats, Welldon Angela’s 2nd generation, i.e., product model WD002–ZJC, is recommended. Precautions for installation: Adjustment of seat body: Rear-facing seat is recommended. Adjust the seat body to make it upright. (almost vertical) state. A d j u s t m e n t o f h e a d r e s t : I t i s with the shoulder of the child.
  • Page 34 4. Instructions for safe operation 4.4.3 Information about child safety seat Mounting position Weight group Front passenger's seat Outboard 2nd-row seats 2nd-row center seat Group 0: <10kg Group 0+: <13kg Group I: 9~18 kg Group II: 15~25 kg Group III: 22~36 kg Note: U= The “general”...
  • Page 35 4. Instructions for safe operation ISOFIX mounting positions for ISOFIX child safety seats Mounting position Weight group Size class Fixture module Outboard 2nd-row Front passenger’s seat 2nd-row center seat seats Carry-cot ISO/L1 ISO/L2 Group 0: <10kg ISO/R1 ISO/R1 Group 0+: <13kg ISO/R2 ISO/R3 ISO/R2...
  • Page 36 4. Instructions for safe operation 4.4.4 Correct installation of child Installation of child safety seat by three- point seat belt safety seat The child safety seat is generally installed by three-point seat belt, ISOFIX system, or LATCH system. the headrest from affecting the performance of the child safety seat during use, it is recommended to remove the headrest of the seat on which the child safety seat is installed.
  • Page 37 4. Instructions for safe operation Grasp the shoulder belt near the buckle Place the seat belt correctly and push Shake the child safety seat back and and pull it up to tension the lap belt. At this the tab up. Make sure the seat belt is not time, press the child safety seat with your twisted.
  • Page 38 4. Instructions for safe operation Installing ISOFIX system Rear seat The rear seats (2nd-row) of this vehicle are Locking clip equipped with the ISOFIX system, and thus suitable for the ISOFIX child safety seats. WARNING installed in this vehicle can be used sharp objects or any other objects other than child safety seats to the anchorages;...
  • Page 39 4. Instructions for safe operation Thread the strap through the top of seat NOTE back, open the cover of rear anchorage the lower anchorage , and insert the , and attach the strap hook to the rear lower guide groove of the child safety seat The rear anchorages of the rear seat anchorage...
  • Page 40 Set the fan speed to the highest. the carbon monoxide gas from entering the vehicle. time in a confined space (such as Please contact the GAC Motor authorized shop a garage, etc.), carbon monoxide will quickly accumulate, resulting to check whether the exhaust system is normal...
  • Page 41 Warning label warning label If the label comes off or is difficult to read, please go to the GAC Motor authorized shop in time for replacement. NOTE In case of any discrepancy in the illustrated location or quantity of the labels, the actual vehicle shall prevail.
  • Page 42 5. Operation of systems and equipment 5. Operation of systems and equipment 5.1 Overview to hybrid system 5.1.1 Hybrid system Be careful when operating the hybrid system, as it is a high-voltage system and its internal parts will become hot when it is working. Follow the warnings on the warning labels.
  • Page 43 5. Operation of systems and equipment Fuel run-out Cautions on high-voltage system When the vehicle runs out of fuel and the WARNING WARNING hybrid system fails to start, fill the vehicle with fuel to such extent that the low fuel level The vehicle is equipped with high- Follow the precautions below to reduce indicator lamp goes out.
  • Page 44 , by the GAC Motor authorized shop to there is a risk of severe electric prevent accidents.
  • Page 45 GAC Motor the vehicle cannot be restarted. To restart the authorized shop for inspection. vehicle, it is recommended to contact the GAC Motor authorized shop. Warning message for hybrid system A warning message will be displayed on the...
  • Page 46 5. Operation of systems and equipment 5.1.2 Characteristics of hybrid Introduction to operation modes CAUTION system The hybrid system, through reasonable control of power coupling output of the engine, In EV mode, when the SOC of the traction As a hybrid electric vehicle, this vehicle drive motor, and generator, realizes various battery is lower than the setting, the is different from conventional vehicles in...
  • Page 47 A/C system is working for the engine automatically stops. If the traction heating. battery is exhausted and the vehicle cannot be started, it is recommended to contact GAC NOTE Motor authorized shop. The engine may also not stop automatically...
  • Page 48 System failure of hybrid system, such as rapid or gentle knocking sound. If the AVAS fails, please contact GAC Motor authorized shop for inspection. working sound of drive motor during engine start/stop, low-speed driving or...
  • Page 49 5. Operation of systems and equipment 5.2 Cab WARNING 5.2.1 Steering wheel should always grasp the outer ring Adjustment of the steering wheel position of the steering wheel (9 o’clock and 3 o’clock positions). must be locked to prevent shifting while the vehicle is running.
  • Page 50 5. Operation of systems and equipment Buttons on steering wheel AV system control button => See page => See page 122 The left buttons include the control buttons of the instrument cluster display and the cruise control buttons: Control buttons of the instrument cluster display: =>...
  • Page 51 5. Operation of systems and equipment 5.2.2 Instrument cluster Instrument cluster with 7-inch display (global theme)* Battery meter Outside temperature indicator Power meter Tachometer Speedometer Time display Fuel gauge Gear display READY indicator lamp EV mode indicator lamp Energy recovery level. Driving mode NOTE The global theme is shown here but is for...
  • Page 52 5. Operation of systems and equipment Instrument cluster with 10.25-inch display * (organic theme) Left display of instrument panel Outside temperature indicator Power meter Speedometer Time display Right display of instrument panel Fuel gauge Gear display Driving mode Energy recovery level EV mode indicator lamp READY indicator lamp Battery meter...
  • Page 53 5. Operation of systems and equipment Speedometer Fuel gauge NOTE The speedometer indicates the current speed The fuel gauge is used to indicate the current of the vehicle in km/h, in the range of 0~240 amount of fuel remaining in the fuel tank. The instrument cluster with 10.25-inch km/h.
  • Page 54 For the instrument cluster with 7-inch phenomenon. display, press the “VIEW” button to enable the instrument cluster to cycle between abnormal, stop the vehicle immediately the organic theme and global theme. for the sake of safety, and contact the GAC Motor authorized shop for inspection.
  • Page 55 5. Operation of systems and equipment Driving information Vehicle status driving information (cumulative distance/ average fuel consumption/ driving time) Vehicle status of the vehicle since the last reset, where the vehicle parameters can be reset by Current trip pressing and holding “OK” button. the vehicle, which cannot be reset.
  • Page 56 5. Operation of systems and equipment Fuel consumption trend * ADAS NOTE The organic theme of instrument cluster Lane keeping Fuel consumption trend chart with 7-inch display is illustrated here and for reference only. Please refer to the actual vehicle. Last 50 km Best fuel consumption in history: 5.1L/100km With the START/STOP button in “ON”...
  • Page 57 5. Operation of systems and equipment Alarm radar * NOTE The Navigation theme of instrument cluster Energy flow with 10.25-inch display is illustrated here and for reference only. For details, please refer to the actual vehicle. Press OK to mute With the START/STOP button in “ON”...
  • Page 58 5. Operation of systems and equipment Alarm center If any alarm message appears, press “OK” Throttle sensitivity* button on the left of the steering wheel to Alarm center will be displayed on the alarm center screen. Comfort In case of several alarm messages, Steering wheel corresponding number and current text power assist...
  • Page 59 5. Operation of systems and equipment Call information* AV and entertainment information * NOTE The organic theme of instrument cluster with 10.25-inch display is illustrated here and for reference only. Please refer to the actual vehicle. Sound source is not available temporarily When the AV system is connected to the With the START/STOP button in “ON”...
  • Page 60 5. Operation of systems and equipment Instrument cluster setting NOTE With the START/STOP button in “ON” position, when the vehicle speed is zero, set the with 10.25-inch display is illustrated here and for reference only. Please refer to system display; the actual vehicle.
  • Page 61 5. Operation of systems and equipment 5.2.3 Indicator lamps Icon Designation Color Function The warning lamp will come on when the vehicle is not started with the START/STOP button in "ON" position, and will go out after the vehicle is started. Charging system warning lamp If this warning lamp comes on after the vehicle is started, it indicates that the charging system is faulty.
  • Page 62 5. Operation of systems and equipment Icon Designation Color Function Right turn signal indicator lamp Green vehicle is on. When the hazard warning lamp switch is pressed, the left/right turn signal indicator and hazard warning lamp If the red indicator lamp comes on, it indicates that the EPB is applied. EPB status indicator lamp Green If the green indicator lamp comes on, it indicates that the EPB is activated.
  • Page 63 If the yellow indicator lamp comes on, it indicates that the LDW system is faulty. In that case, please Yellow LDW status indicator lamp go to the GAC Motor authorized shop for inspection in time. If the blue indicator lamp comes on, it indicates that the LDW system is working normally or Blue intervenes with the steering wheel for deviation correction.
  • Page 64 5. Operation of systems and equipment Icon Designation Color Function Green If the green indicator lamp comes on, it indicates that the BSD system is activated. BSD system status indicator lamp * Yellow When the indicator lamp is yellow, it indicates that the BSD system is faulty. Hill descent control (HDC) Yellow If the yellow indicator lamp comes, it indicates that the HDC system is activated.
  • Page 65 You should read carefully and understand the meaning of each indicator lamp and warning lamp. In case of failure, please go to or contact the GAC Motor authorized shop in time to repair the vehicle.
  • Page 66 If the key needs to be re-customized, the remote control key. you can try to press the buttons on the please inform the GAC Motor authorized shop of remote control key 3 times continuously the key barcode. If the key barcode is missing, CAUTION to activate the function.
  • Page 67 5. Operation of systems and equipment Button operations button NOTE If the button is pressed once within the all doors will be locked; if the button is pressed and held, only the driver’s door will sound once. The horn prompt can window will be automatically closed for be activated or deactivated via “Settings some models, and the four door windows...
  • Page 68 5. Operation of systems and equipment button Button operations NOTE If the button is pressed once within the If the vehicle has the PLG function, two all doors will be unlocked; if the button range can open the liftgate electrically. signal lamps will flash twice and the is pressed and held, only the driver’s During the opening process, if the button...
  • Page 69 It is hold the button to remotely stop the recommended to go to GAC Motor authorized vehicle. shop for the battery replacement. CAUTION the unlocking function may be triggered and then the engine cannot be started.
  • Page 70 5. Operation of systems and equipment 5.3.2 Emergency mechanical key Emergency mechanical key cloth to pry open the chrome plated housing of the remote control key at cloth to pry open the housing of the positions (arrows A and B) in the direction Press the locking button and pull out remote control key at position (arrow E).
  • Page 71 5. Operation of systems and equipment 5.3.3 Door lock system Door inner handle NOTE Central locking button When the child safety lock is activated => See page 67, even if the rear door latch is unlocked, the rear door cannot be opened by the inside handle.
  • Page 72 5. Operation of systems and equipment Door lock hole Unlocking Lock Insert the emergency mechanical key into the driver’s door lock hole. Take out the emergency mechanical key. Pull the mechanical key handle clockwise => See page 64 to unlock the driver’s door. Press the left side of the door handle in P r e s s t h e m e c h a n i c a l k e y h a n d l e the direction of -arrow A- to make the right...
  • Page 73 5. Operation of systems and equipment Mechanical child safety lock * Electronic child safety lock * NOTE Electronic child safety lock button is integrated with rear passenger’s window locking function. After the electronic child safety lock is activated, the rear passenger’s power window control button cannot effectively operate the corresponding window.
  • Page 74 5. Operation of systems and equipment Speed sensing door lock Collision unlock function WARNING If this function is activated with all doors With doors locked and the vehicle START/ closed, the vehicle will be automatically locked STOP button set to “ON” position, when the When the child safety lock is activated, at certain vehicle speed or after certain driving never leave children or handicapped...
  • Page 75 5. Operation of systems and equipment Intelligent active locking NOTE NOTE Intelligent Active Locking” in the AV system. system. successful, the turn signal lamps will successful, the turn signal lamps will flash twice and the horn will sound twice. activated successfully but the liftgate is more than 7 days, the intelligent active ajar, the audible and visual alarms will unlock function will be automatically...
  • Page 76 5. Operation of systems and equipment The intelligent active locking function will not work when one of the following conditions occurs: The START/STOP button is set to “ACC” or “ON” position. The intelligent remote control key is in the car. No intelligent remote control key is detected within 2 m from the vehicle.
  • Page 77 5. Operation of systems and equipment When using the flush-fit door handle, please Ice-breaking operation guide on flush-fit door handle at low temperature read and observe the following precautions: When you approach the vehicle with the key, CAUTION the vehicle will automatically detect the remote control key.
  • Page 78 5. Operation of systems and equipment 5.3.5 Door After the door handle can be moved, WARNING unfold and fold the door handle several times to remove the residual ice and ensure that the door handle can be fully driving, otherwise unclosed doors retracted in place.
  • Page 79 5. Operation of systems and equipment Operation of outside button of liftgate NOTE Unlocking liftgate with remote control key W h e n t h e v e h i c l e i s u n l o c k e d a n d If the vehicle has the PLG function, two stationary, if you press the liftgate unlocking presses on the button...
  • Page 80 5. Operation of systems and equipment If the vehicle has the PLG function, the Setting of second height of liftgate: liftgage will automatically open to the set When the height of opening of liftgate is position. During opening, if you press this 55%~98%, press and hold the inside switch of button, the liftgate will stop opening.
  • Page 81 5. Operation of systems and equipment Emergency opening of liftgate NOTE CAUTION opened, the horn will sound once, the that the intelligent remote control key high-mounted stop lamp will flash 4 is outside the liftgate induction area; times, and the turn signal lamps will otherwise the liftgate will be opened.
  • Page 82 5. Operation of systems and equipment Closing of liftgate NOTE standstill, the turn signal lamp flashes twice and the buzzer sounds. sound intermittently. a corresponding indication on the instrument cluster. CAUTION PLG closing* If you press the liftgate locking button During the closing of the liftgate, never the PLG will be automatically lowered until place your hands or any part of your body...
  • Page 83 5. Operation of systems and equipment 5.3.7 Hood CAUTION Opening of engine hood otherwise accidents may easily occur. to ensure that no person or obstacle is within the movement range of the liftgate. locked to prevent suddenly opening during driving. Push the locking mechanism arrowed to unlock the engine hood fully.
  • Page 84 5. Operation of systems and equipment 5.3.8 Power window Closing of engine hood The power window can be operated when and place it on the stay bar bracket the START/STOP button is in “ON” position, ; lower the hood to a height of about 30 and stays operable within about 30 s after cm away from the lock body, and then let the START/STOP button is turned from “ON”...
  • Page 85 5. Operation of systems and equipment Driver’s power window control button If the button is pulled up to the first If you press the passenger’s door window stop position, the power window will lock button *, the button indicator lamp be lifted for closing until the button is will come on and the front/rear power released or the window reaches the...
  • Page 86 After the window is completely closed, continue to pull up the power window fails, please go to the GAC Motor control button and hold it for about 2 s to authorized shop for inspection in complete the initialization.
  • Page 87 5. Operation of systems and equipment 5.3.9 Electric sunshade* Window open warning * CAUTION When the START/STOP button is set to “OFF” Button operations position with any window open, if you open the The locking-sensitive window closing driver’s door, the system will send a buzzer function is effective only when the battery sound and the instrument cluster display will level and other relevant parts are normal.
  • Page 88 5. Operation of systems and equipment To fully opened the electric sunshade, Remote control AV system display control press and hold the switch for several When you press and hold the button seconds, and then the electric sunshade on the remote control key with the will automatically move to the fully opened Opening/closing ENGINE START/STOP button set to “OFF”...
  • Page 89 5. Operation of systems and equipment Electric sunshade anti-pinch function Initialization of power sunshade WARNING The electric sunshade has anti-pinch function when sliding closed to prevent the sunshade from catching large items when closed. sunshade cannot prevent pinching of When the electric sunshade is in the light or thin objects.
  • Page 90 No maintenance is required during normal use. Body anti-theft function - remote locking If you have any doubt, please contact the GAC NOTE Motor authorized shop. When the START/STOP button is in the “OFF”...
  • Page 91 When the START/STOP button is in ingress in the lamps, please contact “ON” position, if you turn the lamplight the GAC Motor authorized shop for combination switch up or down to the inspection. limit position...
  • Page 92 GAC Motor authorized simultaneously; when the external natural shop for inspection and repair in time.
  • Page 93 START/ the GAC Motor authorized shop for STOP button is turned to “OFF” position and Position lamp inspection in time.
  • Page 94 5. Operation of systems and equipment Manual headlamp leveling NOTE Turn the light switch to the position to turn on the low beam. to drivers of oncoming vehicles at High beam close range, which may easily cause After turning on the low beam, if you push accidents.
  • Page 95 5. Operation of systems and equipment Fog lamp switch Hazard warning lamp When the START/STOP button is set to “OFF” position with headlamps or position lamps on, if you open the driver’s door, the system will send a buzzer sound and the instrument cluster display will display the warning message “Lamp on”.
  • Page 96 5. Operation of systems and equipment 5.4.2 Interior amps The hazard warning lamp shall be turned Vehicle assisted lighting on in the following cases so as to attract the If you press the unlock button on the attention of other road users and reduce the Automatic light-on function of dome lamps remote control key within the effective range, the position lamps will stay on for...
  • Page 97 5. Operation of systems and equipment Dome lamp W h e n t h e d o m e l a m p s a r e o ff a n d t h e automatic light-on function of dome lamps is activated: with the START/STOP button in “OFF”...
  • Page 98 5. Operation of systems and equipment Rear dome lamp Trunk lamp Smart ambient light* If the liftgate is opened, the trunk lamp will Click on the vehicle model in the main interface come on automatically. of AV system or “My Car” in the application menu to enter the My Car interface, and then If the liftgate is closed, the trunk lamp will go out automatically.
  • Page 99 5. Operation of systems and equipment 5.4.3 Wiper combination switch When the ambient light function is Adjust the sensitivity of automatic wiping deactivated, other parameters cannot be adjusted; when the ambient light function MIST: manual wiping is activated with the START/STOP button in “ON”...
  • Page 100 , the front wiper will wipe T h i s f u n c t i o n c a n b e a c t i v a t e d o r go to the GAC Motor authorized shop at a high speed.
  • Page 101 5. Operation of systems and equipment 5.4.4 Windshield Front wiper maintenance WARNING Method 1: Within about 10 s after switching Windshield glass the START/STOP button to the “OFF” position, if you turn the control lever of the wiper combination switch to MIST identifications according to local position and then quickly release it to...
  • Page 102 NOTE Manual anti-dazzle inner rearview mirror If the exterior rearview mirror malfunctions, please go to the GAC Motor authorized shop for inspection in time. WARNING A l t h o u g h t h e c u r v e d ( c o n v e x a n d...
  • Page 103 5. Operation of systems and equipment Electric folding * WARNING NOTE Do not adjust the interior rearview mirror This function can be activated or deactivated during driving, as you will be distracted from driving, causing loss of control to vehicle and dangerous accident exterior rearview mirror”...
  • Page 104 5. Operation of systems and equipment 5.4.6 Sun visor Defrosting and defogging function * CAUTION Air purification to be cleared after the defrosting and defogging function is deactivated automatically, just press the button again. function for a long time; otherwise the heater may be damaged due to overheating.
  • Page 105 5. Operation of systems and equipment 5.5 Seats and storage facilities WARNING 5.5.1 Headrest In order to reduce the risk of accidental casualties, please strictly observe the followings: driving. mounting position. If the headrest is removed or installed improperly, the driver may be seriously injured in an accident.
  • Page 106 5. Operation of systems and equipment 5.5.2 Front seats Height adjustment of front seat headrests Power seat * NOTE When measuring the depth of the seat cushion, be sure to adjust the longitudinal position of the seat to the middle of the slider rail and the seat back to the normal operating state (25°).
  • Page 107 Set the START/STOP button to “ON” position, and click the seat ventilation/heating icon at Pull up the adjusting lever in the direction ventilation function and go to the GAC the bottom of the AV system main interface, of arrow to slide the seat forward or...
  • Page 108 5. Operation of systems and equipment 5.5.3 Rear seat 5.5.4 Storage facilities NOTE Rear seat back folding down / reset Storage compartment on door interior trim Pull the seat back switch towards the panel front of the vehicle and push the seat back backward at the same time until the seat back is locked.
  • Page 109 5. Operation of systems and equipment Instrument panel storage compartment Cup holder Instrument panel lower storage compartment Place small articles here. Front cup holder: hold beverage bottles. Place books, ipad, etc. here. NOTE WARNING For models with mobile phone wireless Do not place hot beverages on the cup charging function, this area is used for holder, or hot beverages may spill out...
  • Page 110 5. Operation of systems and equipment Front central armrest box Storage bag on the back of front seat Front passenger’s glove box Open the front seat central armrest box Pull open the storage bag backwards to Pull the handle to open the glove box to cover upward to place items such as place books, foldable umbrellas and other place items such as document bags.
  • Page 111 5. Operation of systems and equipment 5.5.6 Quiescent current Precautions: management When the vehicle is not started, the battery is Function description: not being charged, and if the electrical devices Function description: (such as radio, lights, etc.) are switched on in The vehicle continuously monitors the battery this case, the battery will be consumed rapidly.
  • Page 112 5. Operation of systems and equipment 5.5.7 Power outlet/USB port Front USB interface Front TYPE-C interface Central armrest box rear USB interface With the ENGINE START/STOP button With the ENGINE START/STOP button in the “ACC” or “ON” position, a mobile in the “ACC”...
  • Page 113 CAUTION The mobile phone wireless charging system is only suitable for the Qi-certified mobile phones. GAC will not assume liabilities and losses for any accident caused by the use The wireless charging effective zone is on of mobile phones or other wireless charging the right side of the shift lever.
  • Page 114 5. Operation of systems and equipment Mobile phone wireless charging switch Symbol status NOTE Symbol Color Status NOTE After the mobile phone wireless charging system is turned on, the status bar icon The mobile lights up, and the icon status will change phone wireless according to the use of the mobile phone Grey...
  • Page 115 WCM area or the mobile used normally, please stop using it and clear the foreign objects phone is deviated go to the GAC Motor authorized shop and relocate the mobile wireless charging function may be for inspection and repair in time.
  • Page 116 5. Operation of systems and equipment 5.5.9 Trunk Trunk volume WARNING Fold down the rear seat back to increase In order to ensure the maneuvering stability of the trunk capacity. => See page 102 the whole vehicle, the luggage shall be placed as evenly as possible, and the heavy objects mobile phone and the charging pad CAUTION...
  • Page 117 5. Operation of systems and equipment Objects in trunk Warning triangle Driver’s tools/spare tire Trunk carpet Pull up the drawstring and open the trunk Pull up the drawstring and open the trunk carpet. carpet. Pull up the drawstring and open the trunk There is a warning triangle in the trunk A spare wheel...
  • Page 118 The luggage rack of this vehicle is a decorative accessories or replacing parts. piece and cannot be used to directly carry It is recommended to use accessories and articles on it. parts approved by GAC. Parts other than GAC ones are not covered by the warranty.
  • Page 119 GAC Motor parts will seriously damage the maintenance of the vehicle may performance of the car.
  • Page 120 A/C air If the A/C system has failure (such as no intake and ensure normal air intake. cooling, odor, etc.), please go to the GAC possible. Motor authorized shop for inspection. maximum effect with windows closed.
  • Page 121 5. Operation of systems and equipment 5.6.2 A/C system A/C control interface description Ventilation soft key * A/C soft key Recirculation/fresh air mode button* Recirculation mode soft key Fresh air mode soft key ON/OFF soft key Front windshield defrost/defog soft key Rear windshield and exterior rearview mirror defrosting and defogging soft key*/rear windshield defrosting and...
  • Page 122 5. Operation of systems and equipment A/C control interface description (continued) Fan speed display Display the air volume (7 levels), swipe the button left and right to adjust the air volume. Air supply mode soft key Fan speed down soft key...
  • Page 123 5. Operation of systems and equipment A/C control buttons Temperature control button CAUTION Set the interior temperature by clicking the AV system soft key or soft key. The temperature value displayed on the AV system display is the target value Press and hold the soft key or of temperature setting, not the actual...
  • Page 124 5. Operation of systems and equipment Air volume setting Air circulation CAUTION Repeatedly click the * soft Click soft key to increase/ key to switch the air circulation among the auto decrease the fan speed by one level. The recirculation/fresh air mode, recirculation mode AV system will display the corresponding accumulation of carbon dioxide in and fresh air mode.
  • Page 125 5. Operation of systems and equipment Automatic mode * defrost/defog function. Rear windshield defrost/defog function If the * button on the AV system CAUTION display is clicked, the rear windshield defrost/ on the FCP is pressed, the button indicator defog function will be activated, and the rear lamp will come on and the A/C system will windshield and exterior rearview mirrors* will lowest, the defrost/defog function...
  • Page 126 5. Operation of systems and equipment Air supply mode the front windshield defrost outlets and Click the air supply mode button on the A/ C control interface of the AV display or in the Defrost mode: Air flows out from the resident toolbar at the bottom of the AV display front windshield defrost outlets.
  • Page 127 5. Operation of systems and equipment 5.6.3 A/C air outlet Instrument panel central air outlet Rear air outlet Panel side air outlet Toggle the paddle to adjust the air Toggle the paddle to adjust the air direction or close the air outlet. direction.
  • Page 128 5. Operation of systems and equipment 5.7 AV system Bluetooth setting interface. Voice button Next song/channel button 5.7.1 Control buttons on the right With the mobile phone connected to the In radio mode, press this button to of steering wheel automatically search for a valid station AV system, after the CarPlay function is activated, press and hold this button to...
  • Page 129 5. Operation of systems and equipment 5.7.2 Basic operation Description of function areas in main interface: Smart card area Click the cards to quickly enter the corresponding function interfaces. Drop-down menu bar area Pull down to enter the drop-down menu bar control interface.
  • Page 130 5. Operation of systems and equipment Driving control panel button : Click it to Drop-down menu bar CAUTION enter the driving control panel. A/C information display/control bar area: display the current A/C information, click system may be triggered under high the A/C area to enter the A/C setting temperature conditions to dim the interface.
  • Page 131 Operations for returning to AVNT system: Left rear Right rear Sunshade window window Click on “GAC” icon in the CarPlay application menu interface to return to the Opening side Closing side Sunshade fully Sunshade fully AVNT system interface. window...
  • Page 132 5. Operation of systems and equipment EasyConnection* Method 1: NOTE F o r a n A n d r o i d p h o n e s u p p o r t i n g EasyConnection function, connect the supported by CarPlay, refer to the unit via a data cable, and click on the EasyConnection icon on the AVNT for...
  • Page 133 5. Operation of systems and equipment 5.7.3 Radio Enter the radio interface in the following ways: Frequency of current Enter the radio interface by clicking on the radio station “Radio” card in the main interface. Channel Channel decrease increase P r e s s t h e s o u n d s o u r c e s w i t c h i n g button on the right side of the steering wheel repeatedly to switch to the Radio interface.
  • Page 134 5. Operation of systems and equipment Enter the local music playback interface in the Sound source following ways: Sound effect setting selection Enter the local music interface by clicking on the “Meida” card in the main interface. Press the sound source switching button on the right side of the steering wheel repeatedly to switch to the local music interface.
  • Page 135 5. Operation of systems and equipment 5.7.5 Bluetooth function If there is no Bluetooth device connected, enter the Bluetooth connection interface in the above way. Bluetooth mode After turning on the Bluetooth function Enter the Bluetooth mode in the following by clicking the “Bluetooth ON/OFF”...
  • Page 136 5. Operation of systems and equipment Bluetooth connection failure Possible cause Action Set the device’s The device’s Bluetooth so that it Bluetooth can be “Visible to function is set Everyone” or can be incorrectly searched or opened for detection compatibility of the The current device with the device is not...
  • Page 137 After the connection customized model for GAC. i s s u c c e s s f u l , “ C o n n e c t e d ” w i l l b e displayed.
  • Page 138 5. Operation of systems and equipment 5.7.7 Settings Enter the system settings interface by pressing the soft key “Settings” in the application menu. In the settings interface, click on an option to select it, click on the slider to enable/disable the function, and drag the progress bar for adjustment. Settings group Function Function...
  • Page 139 5. Operation of systems and equipment Settings group Function Function Options Current driving mode memory Chassis and Chassis and powertrain powertrain Comfortable parking Intelligent high beam Exterior light Follow Me Home Remote unlock All doors/driver's door only Automatic unlocking after shutdown Intelligent active unlock Intelligent active locking Door window lock...
  • Page 140 5. Operation of systems and equipment Settings group Function Function Options Brightness control Range: 1~20 Height adjustment Range: 1~20 Inclination adjustment Range: 1~20 Screen settings DISPLAY PATTERN Standard mode/Snow mode Center console display brightness Range: 0~100 A/C interface hold time 5 s/10 s/15 s/30 s Center console Desktop wallpaper...
  • Page 141 5. Operation of systems and equipment Settings group Function Function Options Media volume Range: 0~39 Call volume Range: 0~10 Natural soundtrack/clear voice/subbass/leisure mode Best listening position Driver/All occupants mode Equalizer mode Classic/Pop/Jazz/Rock/Custom Treble –10~10 Alto –10~10 settings Bass –10~10 Reset Speed-sensitive volume control Startup volume Driving assist chime and media sound...
  • Page 142 5. Operation of systems and equipment Settings group Function Function Options Time and date Setting Basis Settings 24-hour system Language setting Chinese/English/Arabic/Indonesian/Spanish System settings System version System Information Memory size Factory reset Reset...
  • Page 143 SOS button : Press and hold this button function to automatically call the set phone for 3 s to allow the GAC Motor T-BOX number of the emergency contact. to activate the manual emergency call function to call the emergency contact.
  • Page 144 6. Driving guide 6. Driving guide 6.1 Starting and drivings When the transmission gearshift lever is in “P” the brake pedal and press the START/STOP position and the brake pedal is depressed, button to start the vehicle. press the START/STOP button to start the 6.1.1 START/STOP button This method is intended for emergency start.
  • Page 145 6. Driving guide 6.1.2 Vehicle start CAUTION WARNING Enter the vehicle with the intelligent remote control key. s. If the engine is not started successfully, long time in a poorly ventilated place Make sure the gearshift lever is in “P” you must wait about 30 s before next or an enclosed place.
  • Page 146 6. Driving guide 6.1.3 Vehicle shutdown WARNING WARNING Park the vehicle steadily and apply the parking brake. Emergency power-off is forbidden during normal driving, as it is likely to shut down the vehicle, apply the Set the gearshift lever to the “P” position. to lead to vehicle damage, safety and parking brake and take away the key.
  • Page 147 6. Driving guide 6.1.4 Gear description Push the gearshift lever backward to shift P: Parking position from “R” to “D”. In this process, there are point indicates “N” position, and the second resistance point indicates “D” position. WARNING The “R” or “P” gear can be engaged only when the vehicle is completely stationary, otherwise the transmission will be damaged.
  • Page 148 It is possible to switch driving modes via the on the brake pedal and push the gearshift position can not be disengaged, please AV system: contact the GAC Motor authorized shop position to shift to “N” position. ECO: In this mode, the slight power for inspection and repair.
  • Page 149 6. Driving guide Driving mode selection Driving mode Current mode settings Comfort Rapid Rapid Driving mode cooling warming Suitable for driving on congested roads Steering force: comfort Comfort Energy saving AVDC: steady Motion Comfort Movement Set the START/STOP button to “ON” Set the START/STOP button to “ON”...
  • Page 150 A/V Mode Setting”. lining may be worn to the limit. Please go to the GAC Motor authorized shop for inspection as soon as possible. twitches continuously during braking, go to the GAC Motor authorized shop for inspection and repair as soon as possible.
  • Page 151 6. Driving guide Brake booster NOTE The brake booster is used to increase the pressure applied by the driver on the brake depend on the driving environment, road pedal, and it only works when the engine is conditions and driving style, pedal during driving, otherwise the running.
  • Page 152 6. Driving guide WARNING WARNING WARNING A new tire and brake lining having When the brake is wet or icy or when When brakes are overheated, braking n o t u n d e r g o n e r u n n i n g - i n d o n o t the vehicle is running on a salted road, effects will reduce, increasing the have the best adhesion and friction...
  • Page 153 When the gearshift lever is moved to the applied again against slipping of the “P” position from other positions, the EPB vehicle, please depress the brake pedal will be applied automatically. recommended to go to the GAC Motor authorized shop for inspection and repair in time.
  • Page 154 6. Driving guide With the START/STOP button set to “ON” NOTE WARNING position, when the doors are closed, the seat belt is fastened, the gearshift lever When the vehicle is running, do not is in D or R position, and the accelerator ENGINE START/STOP button is in the apply the EPB for speed reduction pedal is depressed, the EPB will be...
  • Page 155 EPB. Contact the GAC Motor authorized shop for inspection and If the service brake fails during driving, repair. pull up the EPB button constantly, and...
  • Page 156 & go conditions. When the driver brakes button again. If the fault is not eliminated, the vehicle, the vehicle will be automatically please go to the GAC Motor authorized parked to avoid slide at startup. shop for inspection. flashes red...
  • Page 157 6. Driving guide 6.3 Electronic service brake Oversteer disabled and the parking brake will be locked system under one or more of the following conditions: The START/STOP button is set to “OFF” 6.3.1 Electronic stability program position. (ESP) The driver’s door is opened or the seat belt is unfastened when the vehicle is stopped.
  • Page 158 6. Driving guide Activation and deactivation Since the ESP works only when the vehicle Understeer is running, the ESP shall be activated for driving safety. The ESP can be disabled in the following special cases: When the vehicle runs with tire chains. Driving To edit When the vehicle travels on roads covered...
  • Page 159 6. Driving guide 6.3.2 Anti-lock braking system Traction Control System (TCS) WARNING (ABS) TCS refers to traction control system. It determines whether the driving wheel slips Anti-lock brake system (ABS) is a active safety based on the speed of the driving wheel and according to weather, road and device.
  • Page 160 In this case, stop kinematics. Therefore, please adjust the ABS, restore normal braking, and go the driving speed according to the road to the GAC Motor authorized shop for inspection as soon as possible.
  • Page 161 6. Driving guide 6.3.3 Hill-start hold control (HHC) 6.3.4 Hill descent control (HDC) Working conditions The gearshift lever is in a position other The hill-start hold control (HHC) is an active The hill descent control (HDC) is a subsystem than “P”. safety system from software function extension of the ESP.
  • Page 162 In addition, In addition, the driver can adjust the vehicle the driver should go to the GAC Motor speed by depressing the accelerator pedal or authorized shop for inspection as soon the brake pedal.
  • Page 163 6. Driving guide 6.4 Driver assistance systems Control buttons NOTE 6.4.1 Adaptive cruise control Precautions for use of radar and IFC (ACC) sensors. => See page 197 The adaptive cruise control, abbreviated to ACC, can automatically adjust the distance WARNING from the vehicle ahead in the cruise control mode.
  • Page 164 ACC is faulty. In that After the ENGINE START/STOP button case, go to the GAC Motor authorized is set from the “OFF” position to the “ON” shop for inspection in time. position each time, ACC will automatically enter the ready state.
  • Page 165 6. Driving guide Deactivating ACC If deactivated by the following ways, ACC may WARNING be resumed through the button ACC can be deactivated by: Depressing the brake pedal. Opening the driver’s door. running” state and the gearshift lever Setting the gearshift lever to a position is in “D”...
  • Page 166 6. Driving guide Resuming ACC Increasing cruising speed NOTE When the corresponding gray indicator lamp To increase the vehicle speed, please do the on the instrument cluster comes on, ACC can following: be reset by the following ways: Depress the accelerator pedal to increase 130 km/h.
  • Page 167 6. Driving guide Decreasing cruising speed Controlling ACC distance Activating ACC after following stop To reduce the vehicle speed, do the following: After the ENGINE START/STOP button is set In the process of following a vehicle in front, to “ON” position, when ACC is activated, the the vehicle will also be stopped if that vehicle is Press the button;...
  • Page 168 6. Driving guide System limitations ACC is limited by physical laws and has certain system limitations. In some driving environments, the driver may feel that the ACC response is lagging or fails to control the vehicle as scheduled. Therefore, the driver must be ready to control the vehicle by himself at any time.
  • Page 169 6. Driving guide Narrow vehicles and Z-shaped traffic in When another vehicle changes the lane. If the target vehicle in front is driven out front. The narrow vehicles and Z-shaped When a vehicle in the adjacent lane goes suddenly and a stationary vehicle appears into the ego lane, if it does not enter the at close range, the RPA sensor and brake sensor only when they enter the detection...
  • Page 170 6. Driving guide Frosting or fogging of front windshield due WARNING to temperature difference or frost in low- temperature and alpine areas, will obstruct the IFC sensor, and cause display of scenarios and traffic, weather and following text messages on the instrument road conditions.
  • Page 171 6. Driving guide WARNING WARNING NOTE ACC does not respond or responds only allowed to use ACC under conditions to a limited extent to the followings: sensor is misaligned due to bumping, such as urban driving, traffic jams, t h e s y s t e m p e r f o r m a n c e w i l l s t i l l multi-curve roads and poor road det er i o rat e e v en af t e r r e p a i r a n d vehicle ahead.
  • Page 172 It is recommended to speed. After the accelerator pedal is go to the GAC Motor authorized shop unable to identify the vehicle ahead, it is released, ACC will readjust the vehicle for inspection and repair in time.
  • Page 173 6. Driving guide 6.4.2 Integrated cruise assist Display of longitudinal distance from NOTE vehicle ahead (ICA) system ACC detects the relative distance and speed The radar sensor and IFC are limited in The integrated cruise assist system is with the vehicle ahead in the same path detection and cannot recognize vehicles abbreviated as ICA.
  • Page 174 6. Driving guide Operation Instructions Interface description steering wheel gently” and sound the corresponding prompt according to the Press the button on the left side of the actual situation of the driver holding the steering wheel to turn on ICA. steering wheel.
  • Page 175 6. Driving guide When ICA intervenes in the steering wheel for Takeover prompt lateral assist control, the driver can still turn When ICA is activated, the lateral control the steering wheel to control the vehicle. When function will be automatically activated if an the driver feels that the torque applied by the effective lane marking is detected on both system is improper, he/she can control and...
  • Page 176 6. Driving guide Note that the lateral assist control function of Intelligent avoidance ICA will be deactivated after the steering wheel When the ICA is activated, the intelligent hands-on reminder is issued and the driver avoidance system will automatic control the does not take over in time.
  • Page 177 6. Driving guide Failure to turn on headlamps at night or in Longitudinal control of ICA is based on the dark tunnel. ACC. For more limitations, please refer Because ICA can only use the limited capacity to the relevant sections of ACC. =>...
  • Page 178 6. Driving guide NOTE CAUTION WARNING When the ICA system is assisting in the control of steering wheel, the driver can reason, such as a brief exit due to function and cannot cope with all still turn the steering wheel to control the lane markings, it will be automatically The driver is always fully responsible vehicle.
  • Page 179 6. Driving guide WARNING WARNING WARNING ICA may cause accidents. Therefore, identify lane markings. The system for pedestrians, animals, foreign the driver should always control may mistakenly identify or even objects, low platform trailers or the vehicle, maintain an appropriate don’t identify a lane marking due to oncoming vehicles.
  • Page 180 6. Driving guide 6.4.3 Forward collision mitigation Detectable objects: Forward collision warning (FCM) system The system issues an alarm for impending collision to alert the driver by detecting objects The FCM assesses the danger level of pre- ahead according to the signal from the MMW collision by detecting the relative distance and radar installed on the front bumper and the IFC speed with the vehicle ahead in the same path...
  • Page 181 6. Driving guide When a collision is about to occur, the system will issue an alarm to alert the driver that the vehicle is ready to apply emergency braking according to the signal from the MMW radar installed on the front bumper and the IFC installed on the front windshield, and then will assist in braking and activate the active brake assist function.
  • Page 182 6. Driving guide Activation and deactivation System limitations NOTE FCM has physical and system limitations. For example, FCW and AEB may be triggered unintentionally or delayed by driver interference near” can be set after the FCW is turned in some cases. So please stay alert and take on.
  • Page 183 6. Driving guide A detectable object ahead suddenly Pedestrians wearing fancy clothes or The vehicle approaches a roadside telegraph pole, railing, tree, etc. comes in front of the vehicle. masks, for example, carnival costumes. There is a bicycle with a special shape Poor visibility conditions, such as sunset, When driving through grass, branches, ahead, such as a tandem bicycle.
  • Page 184 6. Driving guide WARNING WARNING NOTE safety, but it is impossible to violate shall always keep control of the turning the steering wheel will terminate the laws of physics. Do not use the vehicle during driving and take full the FCW alarm and AEB intervention. convenient functions provided by responsibility for the vehicle speed FCM to drive at risk.
  • Page 185 6. Driving guide 6.4.4 Traffic sign recognition After this function is turned on, if the navigation Display interface description system or IFC recognizes the speed limit (TSR) sign on the road ahead, the speed limit value will be displayed on the instrument cluster; TSR provides the driver with speed limit if the current vehicle speed displayed on the information by detecting speed limit signs...
  • Page 186 6. Driving guide 6.4.5 Intelligent speed limiter Functional limitations Road speed limit information for other vehicles is output due to inaccurate adaptive cruise control T he TSR, e ve n a ctivated, m ay in v ol v e navigation and positioning. wrong or failed detection of speed limit sign due to inevitable environmental factors and WARNING...
  • Page 187 6. Driving guide NOTE speed The system has the button state memory The LDW is designed to reduce accidents function, so when the vehicle is restarted, caused by unintentional lane departure. the button will be in the state before last The lane departure warning system detects the lane markings on the road through the IFC installed on the front windshield, analyzes...
  • Page 188 6. Driving guide Activation and deactivation Steering Alert When “Steering” is selected, the system The lane departure warning prompt is only only intervenes in turning of steering triggered when the assist mode is “Warning” or wheel for corrective steering adjustment. interface on the AV system display, click the “Steering and Warning”.
  • Page 189 6. Driving guide The corresponding turn signal lamp is Takeover prompt When the indicator lamp lights up turned on. in green, if no condition mentioned above The hazard warning lamp is turned on. happens and the vehicle departures from the lane (due to the driver’s fatigue, distraction The driver quickly turns the steering or phone calls, etc.), the system will alert the...
  • Page 190 When a fault is detected, the message reading “Please check the LDW” will pop up on the instrument cluster and the indicator lamp turns yellow. Please go to the GAC Motor authorized shop for inspection and repair as soon as possible.
  • Page 191 6. Driving guide CAUTION WARNING of the system may be affected while it intervening in turning of steering wheel for corrective steering adjustment: departure from the lane, it will issue a cannot actively control the vehicle to The vehicle is overloaded. warning or intervene in turning of the change lanes or keep it in the lane.
  • Page 192 6. Driving guide WARNING WARNING WARNING lane markings or lane edges. Due and heat to the IFC, and prohibit marking or judges that the driver to bad weather, poor night lighting, d i s a s s e m b l i n g a n d a s s e m b l i n g deliberately deviates from the lane accumulated water and snow on the parts by yourself.
  • Page 193 6. Driving guide 6.4.7 Intelligent headlight control Activating IHC activate the automatic headlamp on/off The intelligent headlight control (IHC) detects function. After the IHC function is enabled, the time via the IFC installed on the upper edge system is in a standby state. When high of the windshield and automatically switches beam conditions are not met or the between the low beam and high beam.
  • Page 194 6. Driving guide The vehicle speed value is lower than The IFC is damaged or its power supply is NOTE 35km/h. The turn signal lamp is turned on. The high beam and high beam flash WARNING Functional limitations any time. The IHC is a driver assistance function, When the IHC is activated, the automatic which can help you select the lighting...
  • Page 195 6. Driving guide 6.4.8 Blind spot detection (BSD) Activation and deactivation WARNING system* The BSD system detects the vehicles in the changed (for example, the headlamp blind spot and the area behind the blind spot is modified), the IHC performance via the sensor installed at the rear of the may be degraded or the function may vehicle.
  • Page 196 6. Driving guide Alert mode NOTE NOTE When the vehicle is started or the system system can be memorized. After the engine is activated, the indicator lamp on the exterior rearview mirror will light up for the same as those when the engine is shut about 2s, indicating that the function is down last time.
  • Page 197 6. Driving guide Working conditions Radar sensor NOTE driving (vehicle speed >15km/h): When there is no vehicle in the blind spot, Other vehicles enter the blind spot from the system may also send a false alarm in the rear or side. the following situations: Another vehicle approaches this vehicle quickly from the rear of the adjacent lane.
  • Page 198 GAC Motor authorized the vehicle via the BSD sensor installed at the shop for inspection in time.
  • Page 199 6. Driving guide Activation and deactivation Alert mode WARNING When the ENGINE START/STOP button is system, and cannot replace the driver to observe the external traffic display, press the soft key on the right conditions or to make judgments. side of “RCTA” to activate or deactivate this function.
  • Page 200 6. Driving guide Working conditions NOTE NOTE The following conditions shall be met for function activation: When there is no vehicle in the detection The vehicle is in reverse and in R gear. assist function and the driver should area, the system may also give an alarm, always be alert and maintain control of and the false alarm will be given in the The vehicle speed is less than 10 km/h.
  • Page 201 6. Driving guide 6.4.10 Door open warning (DOW)* Activation and deactivation WARNING When the ENGINE START/STOP button is system, and cannot replace the driver to observe the external traffic display, and press the soft key on the right conditions or to make judgments. side of “DOW”...
  • Page 202 6. Driving guide Alert mode Working conditions NOTE The following conditions shall be met for function activation: The vehicle is in a parked state. system, and cannot replace the driver’s The ENGINE START/STOP button is in the driver should always be alert to the the “ON”...
  • Page 203 6. Driving guide 6.4.11 Rear approach alert system* NOTE CAUTION The system may also give an alarm when The rear approach alert function is only there is no vehicle in the detection area. for assist and cannot replace the driver Conditions in which a false alarm may be to monitor the external traffic conditions.
  • Page 204 6. Driving guide 6.4.12 Radar and IFC sensor Working conditions False alarm The following conditions shall be met for When there is no vehicle in the detection area, MMW radar sensor function activation: the system may issue a false alarm when: The MMW radar sensor is installed in the The vehicle is started and the gearshift The vehicle is in a parking lot.
  • Page 205 FCM. matters. MMW radar related functions (ACC/ICA/ FCM, etc.) and go to the GAC Motor Special instructions on MMW radar sensor MMW radar ultrasonic wave (e. g. in authorized shop in time to recalibrate...
  • Page 206 IFC sensor, it is recommended to go performance degradation and even failure lighting are ideal) with a body height of not less to the GAC Motor authorized shop for of FCW, ACC, ICA, AEB, LDW and IHC. In than 0.8m. The IFC sensor must be calibrated related work.
  • Page 207 6. Driving guide 6.4.13 Tire pressure monitoring CAUTION CAUTION system (TPMS) Obstacles such as dust, sediment, mist, T h e T P M S m o n i t o r s t h e p r e s s u r e a n d ice, snow, or sludge on the windshield the PDS function will work normally temperature of the tire via the tire pressure...
  • Page 208 (cold tire pressure) rises to the the GAC Motor authorized shop to for re- normal set value, the fault is eliminated learning and calibration, and the TPMS can brighten to compensate for changes in outside and the TPMS indicator lamp goes out.
  • Page 209 6. Driving guide Interface display Red vehicle icon: FCW triggered ADAS status TSR function Gear Vehicle speed...
  • Page 210 6. Driving guide Red warning belt: BSD triggered...
  • Page 211 6. Driving guide HUD settings NOTE please refer to the actual vehicle. Brightness control Height adjustment Inclination adjustment Standard mode Snow mode Display pattern Red line: LDW triggered system display, press the soft key activate or deactivate this function, and make corresponding settings.
  • Page 212 6. Driving guide NOTE NOTE The front windshield of the vehicle equipped to replace the front windshield, you need to replace it with the corresponding type. function, the corresponding interface Otherwise, there will be problems such as synchronously, and disappears after 3s if no operation is performed.
  • Page 213 6. Driving guide 6.5 Parking assist system (PAS) 6.5.1 Reversing parking aid (RPA) The RPA measures the distance between the Dynamic view vehicle and an obstacle via the radar sensors sending and receiving ultrasonic waves Activation and deactivation When the vehicle runs at a speed not higher than 10km/h with parking brake released and gearshift lever set to “R”...
  • Page 214 6. Driving guide Distance audible alarm Distance to obstacle The audible alarm changes with the distance Alarm tone between the obstacle and the rear bumper, Rear left sensor Rear right sensor Rear middle sensor and the color displayed on the AV system display also changes accordingly.
  • Page 215 6. Driving guide Distribution of RPA sensors CAUTION WARNING sensors clean and never cover the RPA observation of the surrounding sensor. environment. The driver should concentrate and reverse the vehicle s a f e l y a c c o r d i n g t o t h e a c t u a l sensor, it should be kept clean and free situation.
  • Page 216 Do not disassemble of the surrounding environment. The or repair it without permission. driver shall focus on safe reversing and Otherwise, GAC will not assume any position adjustment according to the responsibility for the damage arising practical conditions. therefrom.
  • Page 217 6. Driving guide CAUTION CAUTION The above trajectory is the reference Clean the CCD surface with a piece of and is only used as a reference for judging soft wet cloth to avoid scratching it. visual distance. In case of driving on a slope, the above distances cannot be used pressure cleaner for a long time, and as accurate references.
  • Page 218 6. Driving guide 6.5.3 Around view monitor Activation and deactivation This function can be set “On” or “Off” in the “Settings” item of the panoramic view. (AVM)* With the START/STOP button in the The AVM can be activated/deactivated “ON” position, the AVM can be activated/ The SVM, through real-time image, can automatically when “the RPA sensors deactivated via the gearshift lever:...
  • Page 219 6. Driving guide Interface description Exit Current view direction 2D/wide angle view switching soft key Pop-up message window Setting Trajectory Radar distance display Radar sensing area Parking system is faulty. Please check! View direction switching soft key...
  • Page 220 6. Driving guide Settings of AVM AVM activation via turn signal lamp NOTE When the turn signal lamp-panoramic Trajectory view activation switch is turned on, if the T h e AV M i n t e r f a c e a n d i t s f u n c t i o n The trajectory is displayed in the top view vehicle speed is within 20 km/h and the buttons will vary depending on the vehicle...
  • Page 221 6. Driving guide NOTE NOTE NOTE system starts to display images taken the image display defaults to single 2D p a r k i n g s p a c e i s d e t e c t e d i n t h e around the vehicle, with some guide rear view.
  • Page 222 6. Driving guide NOTE turned on, the image display area is switched to the single 2D left view; when the right turn signal lamps are turned on, the image display area is switched to the single 2D right view. via the “view” soft key, and the image display shows the corresponding view.
  • Page 223 6. Driving guide NOTE CAUTION To ensure the normal operation of the Functional limitations: camera: the function that relies on the camera to and free of ice, snow, accumulated water, dust and other foreign matters. limited. The identification range of the camera is limited, and it is impossible surface of the camera, remove them t o i d e n t i f y t h e t a r g e t b e y o n d t h e...
  • Page 224 6. Driving guide CAUTION WARNING The following conditions can cause the camera failure to identify the target, delay assistance system, and cannot work normally under all driving, traffic, weather and road conditions. When the vehicle is in a complex or poor low light) or poor visibility (caused by environment, drive carefully and heavy rain, snow, dense fog, etc.).
  • Page 225 6. Driving guide 6.6 Acoustic vehicle alerting Working conditions for AVAS system (AVAS) The vehicle has been started (when the vehicle is in battery electric mode and the engine The AVAS makes other road users, including has not been started), the instrument cluster pedestrians, bicyclists, etc., especially the displays the “READY”...
  • Page 226 To prevent an accident, never set the stop driving, and contact the GAC Motor vehicle safety. steering mode during driving. authorized shop for inspection.
  • Page 227 6. Driving guide 6.8 Driving skills 6.8.2 Driving during running-in Inspections after starting/during driving period Check whether the instrument cluster 6.8.1 Pre-driving safety inspection works properly; check whether any In order to ensure the service life of the indicator lamp comes on or any alarm vehicle, the vehicle must be run in at the initial Routine inspection message is shown, etc.
  • Page 228 6. Driving guide Engine running-in Running-in of tire and brake lining WARNING The mileage in the running-in period of a new Within the first 500km of driving, drive the engine shall be 1500km. Do not perform the vehicle at a moderate speed to get the new tires run in fully.
  • Page 229 When CAUTION pedal slightly to allow the vehicle to move forward slowly, and avoid overuse of contact a GAC Motor authorized shop the accelerator pedal. This helps control timely for inspection. excessive gasoline consumption.
  • Page 230 6. Driving guide Precautions under various road conditions frequent short-distance driving will cause NOTE or environments: the engine to warm up repeatedly, which will increase fuel consumption. When the vehicle is driving on a road with The brake linings and brake discs are crosswinds and gusts, please decelerate Precautions when driving over a water- soaked in water while the vehicle is...
  • Page 231 & cold cycle, the condensed water is same time. likely to form in the engine, and when the These products are available at GAC condensed water adheres to the engine Motor authorized shop. oil, it may give an illusion of water-in-oil...
  • Page 232 6. Driving guide WARNING WARNING WARNING “READY” indicator lamp comes on, This vehicle is not designed for depress the brake pedal to ensure keep your foot to press on the brake off-road driving. If off-road driving the brakes are working properly. Wet pedal.
  • Page 233 6. Driving guide WARNING WARNING Before driving, make sure that the parking brake is completely released and the backward after the forward gear is position while the vehicle is moving selected, or move forward when backward. Failure to do so may the gearshift lever is in R position.
  • Page 234 It is recommended to regularly drive indicator lamp comes on or any alarm warmed up before acceleration. to the GAC Motor authorized shop for message is shown, etc. Do not open windows when driving at high inspections: speed.
  • Page 235 6. Driving guide in the vehicle, and know its operation method: In order to ensure the safety of the vehicle, and shall be inspected and replaced regularly; At the same time, be familiar with the use of fire extinguisher, and be prepared to avoid being helpless in case of accidents.
  • Page 236 7. In-service maintenance 7. In-service maintenance 7.1 Maintenance instructions 7.2 Interior maintenance Potential hazards of the vehicle High-voltage electric shock: Do not touch Safety precautions Cleaning and maintenance of instruments high-voltage components to prevent injury from high-voltage electric shock. and plastic parts To avoid potential hazards, please read this Carbon monoxide: Since carbon monoxide Clean the surface of instruments and plastic...
  • Page 237 7. In-service maintenance Cleaning and maintenance of carpet Cleaning and maintenance of leather* Cleaning and maintenance of seat belts Vacuum the dust on the carpet frequently. Vacuum the dust. Pull the seat belt out slowly and keep it extracted. Scrub the carpet regularly with detergent to Clean the leather with a clean soft cloth keep it clean.
  • Page 238 If the the filters at the GAC Motor authorized shop vehicle is left in the sun for a long time, wait according to the provisions of the Warranty...
  • Page 239 If any, drive to the GAC Motor authorized shop for touch-up.
  • Page 240 7. In-service maintenance Waxing Cleaning and maintenance of external WARNING plastic parts Regular waxing can protect the paint surface of the vehicle body and keep the vehicle body External plastic parts are generally washed clean. In order to effectively protect the paint with clean water, soft cloth and soft brushes.
  • Page 241 7. In-service maintenance Washing of window glasses and rearview Cleaning and maintenance of wiper cover CAUTION mirrors plate Clean the window glasses and rearview Try to avoid parking the vehicle under a tree mirrors with alcohol-based glass cleaner, and frequently/for a long time. In case of leaves or back and forth.
  • Page 242 7. In-service maintenance Maintenance of sealing strips CAUTION CAUTION Frequent and proper protection of the rubber sealing strips of the doors, windows and other parts of the vehicle is intended to maintain their to prevent it from falling and hitting the surface with vehicle polish or other flexibility and prolong their service life.
  • Page 243 7. In-service maintenance 7.4 Inspecting and adding Adding fuel 7.4.1 Fuel As the amount of fuel decreases when the vehicle is running, the fuel gauge scale will gradually decrease. => See page 47 When the fuel level is too low, the yellow indicator lamp cluster will give an alarm message.
  • Page 244 NOTE engine. Please contact the GAC 1/4, please refuel in time to avoid the Motor authorized shop immediately Fuel grade: 92# and above high-quality for treatment. fuel supply on the uphill and downhill unleaded gasoline.
  • Page 245 The engine has been filled with high-quality conditions, fuel with high sulfur content engine oil, which can be used in the year- contact the GAC Motor authorized shop timely is used, engine idles for a long time round climate except for extreme cold weather for inspection.
  • Page 246 7. In-service maintenance Inspecting the oil level Be sure to check the oil level regularly. Park the vehicle on a level ground, apply the park brake, and shut down the engine. After the engine cools down, open the engine hood and check the oil level.
  • Page 247 W h e n t h e o i l l e v e l i s c l o s e t o t h e maintenance interval and go to the GAC maximum scale mark , indicating the Motor authorized shop for change.
  • Page 248 In this case, overflowing and the system cools contact the GAC Motor authorized shop timely down before opening the engine for inspection. hood.
  • Page 249 7. In-service maintenance Adding coolant NOTE CAUTION Engine coolant When the system is not cooled, the coolant level will be high, and there will be errors in cooling system is under high pressure. checking the coolant level. In this case, do not open the expansion tank cap, otherwise the emerging coolant will cause scald.
  • Page 250 In this case, please go to the GAC Motor authorized shop for inspection in time. original container, and kept out of children’s contact to avoid poisoning...
  • Page 251 7. In-service maintenance Replacing front windshield wiper blades WARNING NOTE With the wiper switch in the “OFF” position, e n g i n e c o m p a r t m e n t . B e f o r e if the soft key on the right of “Wiper operation, be sure to carefully read Maintenance Mode”...
  • Page 252 Pull up the wiper arm, press the locking must be used. accidents. Therefore, be sure to go to the GAC button-arrow-, and remove the wiper Motor authorized shop to check the brake blade.
  • Page 253 Please contact scale mark “MAX” and the minimum scale cluster displays the information “Please add the GAC Motor authorized shop for mark “MIN”. brake fluid”, be sure to immediately stop the inspection and repair in time.
  • Page 254 In case of unfamiliarity with the operation accordance with environmental process or no special tools, never carry out protection laws. any operations on the electrical system of the vehicle, and contact the GAC Motor authorized shop.
  • Page 255 When the vehicle is running, if the warning lamp comes on, it indicates that the charging system is faulty. In this case, please go to the GAC Motor authorized shop for inspection in time. The battery is located on the left side of the trunk.
  • Page 256 ENGINE inspection. START/STOP button is in the “ON” please go to the GAC Motor authorized position and the vehicle has not been system of the vehicle, never connect shop for replacement; if a wrong type of started.
  • Page 257 Maintenance Manual. If the vehicle is running bulb is damaged or malfunctions, please go to adhesion of new tires is unlikely to the GAC Motor authorized shop for inspection reach the best condition. Therefore, dirty, it is recommended to replace the A/C in time.
  • Page 258 7. In-service maintenance Precautions for wheel failure WARNING WARNING When driving over curbs or similar obstacles, keep a slow speed in the If tires burst or leak when the vehicle is vertical direction of the obstacles as much running, it is very easy to cause serious origin should not be used under as possible.
  • Page 259 After emergency use of the spare tire, it is Winter tires Do not replace only one tire separately, necessary to drive safely to the GAC Motor Winter tires still have good grip performance but at least replace two tires on the same authorized shop or wheel repair shop for full- when roads are covered with snow and ice.
  • Page 260 7. In-service maintenance Please note that the tread of winter tires Inspecting tire pressure WARNING shall have patterns deep enough (tread Adjust to the tire pressure value applicable depth not less than 4mm; otherwise, the to the vehicle according to the tire pressure applicability in winter will be limited).
  • Page 261 7. In-service maintenance Service life of tires NOTE WARNING checked through the information on the tire burst, resulting in a traffic instrument cluster display. accident, injury or even death. valve core. The valve cap prevents the a month or before long-distance ingress of dust and moisture.
  • Page 262 If you find any uneven and excessive dangerous. as shown, the tire can no longer be used safely tire wear, please go to GAC Motor authorized and must be replaced immediately. During deceleration, make full use of shop to check the wheel alignment in time.
  • Page 263 7. In-service maintenance NOTE CAUTION D i ff e r e n t c o u n t r i e s o r r e g i o n s h a v e different regulations for tire chains, and the size and type of the tire chains shall the regulations of each country or region be consistent with the standard tires on...
  • Page 264 8. Technical data 8. Technical data 8.1 VIN The location of the VIN is as shown in the VIN: on the engine hood VIN: on the left side of the instrument panel. NOTE The location indication and quantity of VIN are not complete.
  • Page 265 The electronic VIN and vehicle status information can be read through a special diagnostic scan tool. NOTE If you need to purchase diagnostic scan tool, please go to the GAC Motor authorized shop for consultation and purchase.
  • Page 266 8. Technical data 8.2 Dimensions & parameters of vehicle Dimensions Parameters Item Value Overall length Overall width Overall height Wheelbase Front wheel Wheel track Rear wheel Front overhang Rear overhang Minimum ground clearance (full load) Approach angle (no ° load) Departure angle (no °...
  • Page 267 8. Technical data Mass Kerb mass of vehicle (kg) Gross vehicle weight rating (kg) Model Gross vehicle Kerb mass (kg) Front axle load Rear axle load Front axle load Rear axle load weight rating GAC6470HEVE6A 2045 1082 Comprehensive parameters Corresponding model parameters Item GAC6470HEVE6A Non-STT...
  • Page 268 8. Technical data Parameters of engine Model 4B20L1 Layout type Transverse front Type Gasoline engine, spark-ignition, in-line, four-cylinder, four-stroke, GDI, Number of cylinders (pcs) Ignition order 1–3–4–2 Bore (mm) Travel (mm) Displacement (mL) 1999 Compression ratio Rated power/speed (kW/(r/min)) 38/4000 Maximum net power/speed (kW/(r/min)) 103/6000 180/4500...
  • Page 269 8. Technical data Item Capacity 92# and above high-quality lead-free Fuel Capacity gasoline Engine coolant DF-6, -35°C coolant Capacity Engine oil grade: API SN Engine oil Oil viscosity: SAE 0W-20 Change Electromechanical coupling Dexron VI Change Integrated motor coolant DF-6, -35°C coolant Capacity DOT4 Capacity...
  • Page 270 8. Technical data Wheels lamps 7J×18*, 7.5J×19*, 8.0J×20* 235/60R18*, 235/55R19*, 245/45R20* Transmission parameters Front wheel Rear wheel Tire pressure Model H7EF26A 230kPa 230kPa Type 2-Speed DHT T145/90R17 Drive Final ratio 3.174 Pressure of spare tire 420kPa 1st gear 1.346 Steering gear 2nd gear 0.859 Reverse gear...
  • Page 271 8. Technical data Dynamic balance of wheels Wheel alignment parameters Residue dynamic Designation Parameters Designation unbalance Individual toe-in Inner side Wheel camber Front wheel Front wheel Outer side Kingpin caster angle Inner side Kingpin inclination angle Rear wheel Outer side Individual toe-in Rear wheel Wheel camber...
  • Page 272 8. Technical data Drive motor Lamps Model Power Item Parameters High beam Peak power 134kW Low beam Peak torque Daytime running lamp * Max. operating speed 14900r/min Front turn signal lamp Operating voltage range 220~420V Front position lamp Integrated MCU Rear fog lamp Side turn signal lamp Item...
  • Page 273 8. Technical data Fuse in instrument panel PDU The fuses may slightly vary from vehicle to vehicle. In this regard, the actual vehicle shall prevail.
  • Page 274 8. Technical data Rated Rated Feature/component Feature/component value value IF01 Front 12V power outlet IF19 7.5A (IG1 power supply feedback) IF02 7.5A IBCM IF20 7.5A IF03 7.5A IF21 7.5A IF04 7.5A IF22 7.5A IF05 IF06 — — Panorama sunroof sunshade motor*/left front IF23 7.5A seat connector ( HVSM power supply)
  • Page 275 8. Technical data Rated Rated Feature/component Feature/component value value IF53 IBCM IF35 7.5A IF54 — — IF36 IBCM (turn signal lamp power supply) IF55 — — IF37 IF56 Panorama sunroof sunshade motor Instrument panel switch block - right/instrument IF38 IF57 —...
  • Page 276 8. Technical data Fuse in engine compartment PDU The fuses may slightly vary from vehicle to vehicle. In this regard, the actual vehicle shall prevail.
  • Page 277 8. Technical data Rated Rated Feature/component Feature/component value value EF01 — — EF22 EF02 — — EF23 EF03 — — EF24 IG1 power supply EF04 Cooling fan module EF25 EF05 EF26 ACC power supply EF06 Electric water pump (drive motor) EF27 Blower Left exterior rearview mirror*/right exterior...
  • Page 278 8. Technical data Rated Rated Feature/component Feature/component value value Canister solenoid valve/oil pump solenoid ER08 — — EF39 valve/oil control valve (exhaust)/phase driver ER09 — — (intake) /PCV heater/PCV heater relay (ER01) ER10 — — EF40 7.5A Fuel EVAP leak diagnostic module ER11 —...
  • Page 279 9. Accident handling 9. Accident handling 9.1 Driver’s tools and spare Hub trim cover removal tool* Spare tire tire First aid kit* Driver’s tools Remove the spare tire: Open the liftgate. Lift the trunk carpet. Medical kit: The medical kit contains The following tool kit provided by the vehicle trauma emergency medical supplies (e.g.
  • Page 280 9. Accident handling 9.2 Use of warning triangle Placement distance NOTE Ordinary highway The spare tire has been inflated, and its Expressway tire pressure shall be checked regularly to Daytime Night pressure, and multiple inspections shall be carried out within 1 year. CAUTION WARNING The data above is for reference only.
  • Page 281 9. Accident handling NOTE Preparations Apply the parking brake. to attract the attention of passersby or Set the gearshift lever to the P position. other drivers regardless of the lighting Set the ENGINE START/STOP button to conditions. the “OFF” position and turn on the hazard warning lamp.
  • Page 282 9. Accident handling Unscrewing the wheel bolts Set the wheel bolt removal wrench firmly on the wheel bolt, and unscrew the wheel bolts For models equipped with wheel hub Place the jack directly under the spine counterclockwise. trim cover*, remove the trim cover before Extend the jack high to ensure that the CAUTION groove of the jack can engage with the...
  • Page 283 9. Accident handling WARNING WARNING Improper use of jack will cause serious injury. used to lift the vehicle rather than other heavy objects or vehicles. flat ground, and a hard pad (height not more than 1cm) can also be the engine, otherwise an accident will placed under the jack as needed.
  • Page 284 CAUTION that the bolt is easy to tighten. After installing the wheel, please go to the GAC Motor authorized shop in time to they must be replaced and the thread check the tightening torque of the wheel hole cleaned.
  • Page 285 9. Accident handling 9.5 Fuse Engine compartment PDU Replacing fuse Instrument panel PDU Open the engine hood. Pull out or install the fuse using the fuse Press the fixing clip in the direction of arrows A and B to completely unlock the Remove the left lower guard of the instrument panel (shaded part with dotted lines) to expose the fuse above the...
  • Page 286 CAUTION fuse must be exactly the same as the replacing the fuse. original one. consult the GAC Motor authorized shop. sheets, paper clips, etc. If the fuse is blown (as arrowed), it is recommended to replace it with a new Pay attention to protection against moisture.
  • Page 287 9.6 Emergency start Jumper cable If the vehicle’s battery is depleted, you can start the vehicle following steps below or contact the GAC Motor authorized shop. WARNING risk area, and improper operation can easily lead to casualties. Open the engine hood, find the harness...
  • Page 288 9. Accident handling NOTE CAUTION wear-out effect of certain electrical as indicated by arrow D for emergency consumers, the power stored in the charging of the 12V battery via another battery is gradually depleted even when vehicle. the vehicle is not in use. If the vehicle is not in use for an extended period of vehicles, be sure to first connect the time, the battery may become depleted...
  • Page 289 9. Accident handling WARNING WARNING WARNING Improper use of jumper cable may cause The jumper cable should be correctly before removing the jumper cable. battery explosion and serious injury to connected to the positive and negative personnel. battery terminals according to the above instructions.
  • Page 290 If the vehicle needs to be towed, it shall be towed by the GAC Motor authorized shop or a professional towing company. It is recommended to use a rollback tow truck for towing. If the conditions can not be met, a wheel-lift truck can also be used for towing the vehicle as appropriate.
  • Page 291 9. Accident handling Emergency towing Installing a towing hook If it is impossible to find a tow truck in an emergency, fasten the towing cable or towing chain in the emergency towing ring to temporarily tow the vehicle. However, this method is only suitable for low speed and short WARNING In emergency towing, drive slowly to...
  • Page 292 9. Accident handling 9.8 Getting out of a trap Precautions for towing During the emergency towing, be sure to follow the instructions below: Before emergency towing, be sure to follow the If the vehicle is stuck on a soft road such as Start the engine and drive at a slow instructions below: sandy, muddy or snowy road, follow the steps...
  • Page 293 Wait until steam no longer vehicle. If the fault still exists, please contact the vehicle, but refuel the vehicle before comes out before opening the engine the GAC Motor authorized shop for inspection starting. hood. immediately. If the instrument cluster shows “Stop safely, Please check the intake grille and leave the vehicle urgently!”...
  • Page 294 The high-voltage system may be shut down and the high-voltage current will be cut off in an emergency after a collision to minimize the risk of current leakage. If the vehicle cannot be restarted, please contact a GAC Motor authorized shop for inspection in time.
  • Page 295 delivered, the actual vehicle shall prevail. without prior notice. manual shall not be photocopied or extracted.