Clearing Learned Functions, Renamed Source Names, And Setup Manufacturer Codes - Yamaha HTR-5490 Owner's Manual

REMOTE CONTROL FEATURES
Clearing Learned Functions,
Renamed Source Names, and
Setup Manufacturer Codes
1 Press an input selector button or Å to select
the area for which you want to clear the
name, function or manufacturer code.
SYSTEM
POWER
A
V-AUX CBL/SAT
D-TV/LD
2
Press CLEAR by using a ballpoint pen or
similar object.
CLEAR
Note
• If you do not press any button within 30 seconds during steps 2
and 3, the clearing process is canceled. If this happen, start over
from step 1.
3
Press u / d to select the clear mode.
The mode is shown in the display window in the
following order:
CH
–
PRESET
(L: name of a component) Clears
all learned functions for the
component area.
Clears all learned functions for
this unit control area.
Clears all learned functions.
Clears all renamed source names
in the display window.
Clears all programmed functions
including setup manufacturer
codes. This returns to the factory
settings.
46
STANDBY SLEEP 6CH INPUT
PHONO TUNER CD
MD/TAPE CD-R
VCR 1 VCR2/DVR DVD
+
TV VOL
CH
TV MUTE
+
SELECT
PRESET
TV VOL
–
4
Press and hold CLEAR again for about 3
seconds.
"C:OK" appears in the display window.
CLEAR
Note
• "C:NG" appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
5
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.
CLEAR
Note
• "ERROR" appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.