Controls And Functions; Front Panel - Yamaha HTR-5490 Owner's Manual

Front Panel

1
NATURAL SOUND AV RECEIVER
STANDBY
/ON
SPEAKERS BASS PROCESSOR
EXTENSION DIRECT
A B
8 9 0
1
STANDBY/ON
Turns on and sets this unit in the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit consumes a small amount of
power to receive infrared-signals from the remote
control.
2
Remote control sensor
Receives signals from the remote control.
3
Front panel display
Shows information about the operational status of this
unit (see page 8).
4
INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) to receive when one component is
connected to two or more input jacks of this unit (see
page 27). Priority cannot be set when 6CH INPUT is
selected as the input source.
5
INPUT l / h
Selects the input source you want to listen to or watch.
4

CONTROLS AND FUNCTIONS

2 3
PRESET/ PRESET
A/B/C/D/E TUNING
/TUNING
TUNER
EDIT
STEREO PROGRAM
DSP
EFFECT
q w e r
4
INPUT M0DE
D I G I T A L
TUNING
FM/AM MEMORY
MODE
MAN'L/AUTO FM AUTO/MAN'L MONO
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
SILENT VIDEO AUX
PRESET
/TUNING FM/AM MEMORY
EDIT MAN'L/AUTO FM
t y
i o p
u
6
VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
7
6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
The source selected by pressing 6CH INPUT takes
priority over the source selected with INPUT l / h (or
the input selector buttons on the remote control).
8
SPEAKERS A/B
Turn on or off the set of main speakers connected to the A
and/or B terminals on the rear panel at each time its
corresponding button is pressed.
9
BASS EXTENSION
Turns on or off the BASS EXTENSION function at each
time the button is pressed, this feature boosts the bass
frequency of the left and right main channels by +6 dB
(60 Hz) while maintaining overall tonal balance. This
boost is useful if you do not use a subwoofer.
However, this boost may not be noticeable if "1B MAIN
SP" on the SET MENU is set to SMALL and "1E LFE/
BASS OUT" is set to SWFR.
0
PROCESSOR DIRECT
Turns on or off the PROCESSOR DIRECT function at
each time the button is pressed. When this is on, BASS,
TREBLE, and BASS EXTENSION are bypassed,
eliminating any alteration of the original signal.
5 6
INPUT VOLUME
6CH INPUT
BASS TREBLE
– + – +
TUNING
MODE
AUTO/MAN'L MONO
a
s
7