Related Manuals for Alu Rehab NETTI S
Summary of Contents for Alu Rehab NETTI S
- Page 1 S FAMILY C O M F O R T USER MANUAL NETTI S This product conforms to 93/42/EEC for medical products. UM0130UK 2020-08 My-Netti.com...
-
Page 2: Table Of Contents
CONTENTS 1. INTRODUCTION Areas of use/indications for Netti S Quality and durability Environment and disposal Information for re-use About this manual Vital measurements 2. QUICK REFERENCE 3. DESCRIPTION 4. FEATURES OF NETTI S 5. ACCESSORIES 5.2 Mounting of Hip Belt 5.3 Mounting of H-Belt bar... - Page 3 12. TESTS AND WARRANTY 12.1 Tests 12.2 Guarantee 12.3 Claim 12.4 Special adjustment/adaptations 12.5 Combination with other products 12.6 Service and repair 13. MEASUREMENTS AND WEIGHTS 14. HOW NETTI S “GROWS” WITH THE USER 42 Model: NettI S My-Netti.com Language: English Version: 2020-08...
-
Page 4: Introduction
(stabilization). Netti S is a tilt- and back recline wheelchair Netti S has been crash tested at Millbrook Proving Ground, Bedford - UK and RISE (Research Institute of Sweden) according to... -
Page 5: Areas Of Use/Indications For Netti S
CONTRA INDICATIONS to the greatest extent possible. • That Alu Rehab’s products are ensured Netti S is not suited for persons with a a long service life and a high degree of strong enhanced muscular spasticity. In flexibility - to benefit the environment this case we recommend the Netti Dynam- and economy. -
Page 6: Information For Re-Use
1.4 INFORMATION FOR RE-USE In order to avoid damages while using All products from Alu Rehab are designed the Netti S wheelchair, please read this to give years of maintenance-free service. manual carefully before starting to use All products can be adapted for re-use by the chair. -
Page 7: Vital Measurements
1.6 VITAL MEASURES Specification min. max. Netti S is a comfort wheelchair designed for both outdoor and indoor use. Overall length with leg support and push bow 905 mm 905 mm Specification varies between countries Overall length without leg 740 mm... -
Page 8: Quick Reference
It gives you a brief corrosion and must be avoided. introduction to the use and care of the Netti S wheelchair. The anti-tips should always be used for the safety of the user. The quick reference is not a... -
Page 9: Description
25. Head support depth knob 11 12 13 14 * Product configuration may vary between different countries If any of these parts are missing, please contact your dealer. For complete information, please contact your dealer Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 10: Features Of Netti S
4. FEATURES OF NETTI S STANDARD ACCESSORIES SEAT SEAT • Fixed seat plate • Tray • Netti Sit S Pressure distributive cushion - • Hip belts / pelvic stabilizer and 4 points • Tilt -0° to +35° harnesses • Adjustable seat height from 440 - 470mm •... -
Page 11: Accessories
Depth and height info@solidworks.com adjustable. Back extender Increases the Velcro back with 100 mm. Seat width pads Side, depth and height Calf huggers on the calf supports. adjustable see chapt 6.12 Ankle huggers Model: NettI S My-Netti.com Language: English Version: 2020-08... - Page 12 Tool set Netti Nature Kit with 12” front wheel and frame to fix to Netti S, The spare part and accessory catalogue allows for driving outdoors can be downloaded from our home and off-road.
-
Page 13: Mounting Of Hip Belt
• The hip belt bracket on the seat plate can be moved to 7 different positions .com providing the optimal position for the hip belt. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 14: Mounting Of H-Belt Bar
The lower ends of the belts can be fixed like shown in chapter 5.1 4 mm Allen key for M6 screws with pan heads. 5 mm Allen key for M6 screws with cylinder head. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 15: Assembling And Adjusting
Main wheel 16” x 1,4”: 1,7 kg each Front castors 6”: 0,6 kg each Leg support: 2,1 kg (with foot board) Back cushion Super Stabil S: 1 kg Netti S Sit cushion: 0,8 kg Head support A Mini: 0,75 kg Necessary tools are described under each chapter. -
Page 16: Seat Height At The Front
Readjust the brakes. house. Readjust the angle of the bearing 6.6 SEAT HEIGHT AT THE house. REAR The seat height at the rear depends on: • Size of main wheel. • Position of main wheel. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 17: Backrest
See picture on next page The backrest hinge must be in the same positions on both sides. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 18: Adjusting The Seat Plate Depth
• Insert the screws and fix. • Replace all components. Back hinge position Cylinder position info@solidworks.com Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 19: Adjusting Seat Depth At The Front
4 mm Allen key By users with strong involuntarily for M6 screws. movements the extension pieces must not Tighten the screws be pulled out more than 50 mm. well after adjusting. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 20: Anti Tip
6.13 ANTI TIP Netti S is always delivered with anti tips. The anti-tips are to be activated in all daily 5 mm Allen key. use. Always activate the anti-tip whenever the wheelchair is left without attendant. -
Page 21: Adjusting The Velcro Back
2 square nuts. • Adjust the height and width of the side support. Check that the back cushion cover the side support and leave no hard edges. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 22: Leg Support
6.18 LEG SUPPORTS FOOTBOARD HEIGHT ADJUSTMENT Netti S is as a basis delivered with Universal leg support with foot plate and heel strap. Loosen the M6 screws holding the leg Angle adjustable leg support and Netti Dynam- support length-profile on the outside with ic leg support are also available for Netti S. - Page 23 ADJUSTMENT Loosen the two M6 screws holding the calf pad arm and slide each calf pad up or down to de- Netti S has also other leg support sired height. They should in addition to support- alternative: ing the calf also help prevent the feet sliding •...
-
Page 24: Head Support
Warning: The adjustment should be carried out by a trained professional. Please note - weekly lubrication of the gliding length profiles with white Vaseline is important to ensure smooth function of the Netti Dynamic System Leg supports. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 25: Push Bow
Remember to release the levers To get the push bow out of the way it when adjusting the head support. can be turned all the way down till it touches the chair back. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 26: The Brakes
6.21 THE BRAKES Netti S with 16” drive wheels is equipped with drum brakes 3 operation modes • Parking brakes - with foot pedal, • User operated parking brakes - with handle. • Attendant brakes with brake handles on the... -
Page 27: The Recline Cylinder Change
Tighten the nut A close to the head with the taut. 17 mm open end spanner and fix the gas cyl- inder firmly. Fold up the back and fix the cylinder to it. Check the recline function. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 28: Tilt And Recline
The correct relative angle between the body To ensure correct function of the parts remain the same when the seating unit wires, these must never be taut. is tilted. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 29: Tilting The Seat Unit
Wrong usage of recline causes an increased possibility of sliding, and this info@solidworks.com means an increased danger of shear (vertical and horizontal forces) and pres- The recline label sits on the push bar: sure sores. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 30: Manoeuvring
Thereby you may lose steering control and the leg supports • Lift the push handles while pushing the may break. chair onto the step. Turn the anti tip down. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 31: Driving - Step Up
• Drive carefully down the step and move brakes. the wheelchair backwards on the main wheel until the front castors have come away from the step. • Put the front castors down on the ground. Turn the anti tip down. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 32: Driving - Up Stairs
Techniques for transferring to/from the on their back. wheelchair should be practiced well with the persons involved. Here, we give some important advices for preparation of the chair: Model: NettI S My-Netti.com Language: English Version: 2020-08... - Page 33 • Pull the wheelchair backwards 50-100 mm in order to make the front castors turn forward and lock the brakes. • Remove leg supports. • Tilt the chair forward. Model: NettI S My-Netti.com Language: English Version: 2020-08...
-
Page 34: Point Of Balance
8.8 POINT OF BALANCE 8.10 CAMBER ANGLE Adjust the point of balance by changing Netti S has as standard no camber angle the position of the main wheel in the main with its standard 16” main wheels. When the wheel bracket. -
Page 35: Transport
12° when the chair Before using Netti S as a seat in a car, be is used as a seat in a car. sure to remove and secure all parts and... -
Page 36: Transporting In Air Plane
9.3 TRANSPORT IN AIR PLANE Netti S wheelchair may be transported in air plane without any restrictions. 10.1 MAINTENANCE Netti S wheelchair is equipped with 2 gas INSTRUCTIONS springs. These are however not classified as dangerous goods. You as a user of the wheelchair (and... -
Page 37: Long Time Storage
NETTI CUSHION CLEANING You can order original paint from PROCEDURES: Alu Rehab to repair scratches and minor damages to the paint: Please contact your dealer to order. CORE Washing Hand wash 40ºC 10.3 LONG TIME STORAGE Disinfection Virkon S Autoclave 105ºC... -
Page 38: Troubleshooting
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation ahead of the fixing. Model: NettI S My-Netti.com Language: English Version: 2020-08... -
Page 39: Tests And Warranty
In such cases, this guarantee shall 12.1 TESTS be considered null and void. Netti S is tested and has been approved for This warranty is only valid when usage both indoors and outdoors. The chair is the user use, maintain and handle the CE marked. -
Page 40: Special Adjustment/Adaptations
CE mark given by Alu Rehab A.S Norway. If the manufacturer that is performing the this is the case, the warranty given by Alu substitution or alteration. -
Page 41: Measurements And Weights
Measured from front of seat plate to backrest hinge without cushion. When mounting seat depth extenders to Netti S with seat width 350 mm, the seat depth can be extended to 395 and 440 mm. When using Netti Smart S backrest cushion, subtract approximately 30 mm. -
Page 42: How Netti S "Grows" With The User
Netti S allows for adapting to the evolution and growth of the user by regular adjustments of the different wheelchair features. Netti S offer the user the best and safest wheelchair benefits. Netti S will be delivered with different configurations and Netti equipment and must therefore be adjusted to the user when the wheelchair is received the first time or when the user’s situation like weight or /... - Page 43 Size 3 Max seat width 350 mm - starting from 260 mm When the user has outgrown Netti S, a wide range of Netti wheelchairs with a wide range of adjustable features and accessories are available. Please see our homepage www.My-Netti.com Model: NettI S My-Netti.com...
- Page 44 UM0130 UK This product conforms to 2020-08 93/42/EEC for medical products. FEEL FREE TO CONTACT US: MANUFACTURER: DISTRIBUTOR: Alu Rehab AS Alu Rehab ApS Bedriftsvegen 23 Kløftehøj 8 4353 Klepp Stasjon DK-8680 Ry NORGE Tel: +45 87 88 73 00...
Need help?
Do you have a question about the NETTI S and is the answer not in the manual?
Questions and answers