Related Manuals for Alu Rehab Netti Mini
Summary of Contents for Alu Rehab Netti Mini
- Page 1 MINI FAMILY C O M F O R T usEr MaNual netti mini This product confirms to 93/42/EEC for medical products. My-Netti.com...
-
Page 2: Table Of Contents
1.4 Environment and disposal 1.5 Information for re-use 1.6 About this manual 1.7 Vital measurements 2. QUICK REFERENCE 3. DESCRIPTION 4. STANDARD FEATURES OF NETTI MINI 5. ACCESSORIES 6. ASSEMBLING AND ADJUSTING 6.1 Unpacking 6.2 Main wheels 6.3 Front fork 6.4 Front castors... - Page 3 10.3 Long term storing 11. TROUBLESHOOTING 12. TESTS AND WARRANTY 12.1 Tests 12.2 Guarantee 12.3 Claim 12.4 Netti Customized / Individual adaptations 12.5 Combination with other products 12.6 Service and repair 13. MEASUREMENTS AND WEIGHTS Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
-
Page 4: Introduction
1. inTRODUCTiOn netti Mini is a comfort wheelchair for children meant for both indoor and outdoor use. it is tested to Din en 12183:2014. the tests were carried out by tÜV SÜD Product Service GmbH in Germany. netti Mini is crash tested and... -
Page 5: Areas Of Use/Indications For Netti
1.3 QUAlity AnD DUrABility The netti mini wheelchair is tested at TÜV SÜD Product Service GmbH in Germany, following the European Standard Din En 12183:2014. -
Page 6: Information For Re-Use
1.5 infOrMAtiOn fOr re-USe in order to avoid damages while using All products from Alu Rehab are designed the netti mini wheelchair, please read this to give years of maintenance-free service. All products can be adapted for re-use by manual carefully before starting to use the an authorised dealer. -
Page 7: Vital Measurements
1.7 VitAl MeASUreS Specification min. max. Overall length with leg netti mini is a comfort wheelchair support and push bow 786 mm 798 mm designed for both outdoor and indoor use. Overall width 506 mm 605 mm min. dimensions in table refer to seat... -
Page 8: Quick Reference
Announcements to product safety and eventually product recalls will be published For visually impaired people, manuals on our home page and catalogues can be downloaded at www.My-Netti.com www.My-Netti.com If in doubt - contact your dealer! Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 9: Description
20. Foot board 21. Brake * Be aware that specifications may vary between countries. If any of these parts are missing, please contact your dealer. For complete information, please contact your dealer. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 10: Standard Features Of Netti Mini
• Spoke protectors (See chapter 5) • Push rims (See chapter 5) PUSH HANDLES • height adjustable, swingable, removable. BRAKES - Drum brakes BRAKES - Netti Mini - User brakes ANTI-TIP • Height and length adjustable - swingable BACK REST BACK REST •... -
Page 11: Accessories
Wedge Universal Increases side support. Adjustable in fixed positions between 33° to 105° using an adjustment wheel. Lumbar support Increases lumbar curvature. Amputation support Brake extenders 90 mm 120 mm 250 mm Model: Netti Mini My-Netti.com Language:English Version: 2017-11... - Page 12 Meant for correction of bad postures in the upper trunk. Support E adjustable side supports Upholstery for side support comfortpads for cloth protectors. Support F with cheek/chin Width 25 mm support band tool set Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
- Page 13 Wide w/ axle Long/Wide w/ axle Frame extender ncreases distance between main wheels and front castors. Reduces tipping risk. The anytime updated complete accessory program is found on our web page www.My-Netti.com- order forms. Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
-
Page 14: Assembling And Adjusting
To check that the main wheel is properly attached to the hub, remove the finger from the central knob and pull the main wheel. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 15: Front Castors
To frame totally wreathes the wheel change the height of the front castors bushing. - unfix the wheel and replace it in the required position in the front fork. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 16: Back Rest
Always start with adjusting the seat depth backwards, then adjust the leg support fixing bracket to make the leg support knee joint align with the user knee joint. If necessary, the driving wheel position also needs to be change. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 17: Adjusting Seat Depth At The Front
This can be prevented by changing • Lock it in position by moving forwards the position of the main wheel in the with the spring tension. main wheel bracket. (See chapter 6.6). Adjust anti-tippers accordingly - chapter 6.10 Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 18: Adjusting Arm Supports
The cushion covers are washable and thereby reusable. Follow the instruction on the back of the cushion for correct maintenance and washing of the cushion. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 19: Adjusting The Velcro Back
Angle adjustable leg supports with foot plates and calf supports are standard Angle adjustment for netti mini. many prefere Universal Loosen the star wheel on the outside of leg supports with foot board. Both are the leg support. Lift the lower part of the described in this chapter. - Page 20 • Loosen the screw on the outside of reMOVinG tHe leG SUPPOrtS: the foot plate with an Allen key - see picture above -. • Tilt the foot plate to required angle and tighten the screw. 5 mm unbrakonøkkel Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
- Page 21 B between the calf support and bracket and reposition it to required position before fixing the screw again. 13 mm Allen key Never stand on the foot plates! Never lift the wheelchair by the leg supports. Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
-
Page 22: Head Support
• Untighten the four screws holding the adapter together. • Move the adapter to the required position and fix the adapter by tightening the screws diagonally. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 23: Push Handles
Check that the safety screw is screws. mounted To remove the handles, the safety screw at the bottom of the handles 5 mm also has to be removed. Allen key Model: Netti Mini My-Netti.com Language:English Version: 2017-11... - Page 24 Tighten the wire clamp, and adjust the foot screw out again. Do not leave the user in the wheelchair without activating the parking brake. Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
-
Page 25: Assembly Of Hip Belt
The triangular brackets should stand right • Pull the belt thorough the hole in the hip above shoulder heigt. belt bracket. On netti mini sw 250 mm, the triangular brackets must be mounted on the outside of the H-belt brackets. -
Page 26: Seat Angle / Tilt And Back Angle/Recline
When tilting the seating unit forwards First tilt then recline afterwards. When the user may slide out. Alu Rehab bringing the client upright again, the se- recommends using a hip belt. quence should be recline first then tilt. It 7.2 BACKREST ANGLE... -
Page 27: Operating The Tilt Handle
SCALE 1:15 RECLINING THE CHAIR BACK This drawing is Alu Rehab A.S property and should not be copied or delivered to other firms or Wherever you let the handle loose, the seat- Press the right handle and put pressure to ing unit will stay in this position. -
Page 28: Transport
8. TRAnSPORT free holes in the wheel frame bracket. Hook on a hook/carabiner in the “eye-bolt” Netti Mini is tested and approved to crash The angle of the straps should be 0-45° test ISO 7176-19:2008 stating it is suitable Item number for 1 pair of eye bolts with to be used as a seat in a vehicle, bushing: 21074. -
Page 29: Transport In Airplane
Make sure approved with Netti cushions. Always use the user can easily reach any hand rails Netti Cushions when Netti Mini is used as a or handles. seat in a car. 9. MANOEUVRING... -
Page 30: Driving - Step Up
Avoid turning the wheelchair in the Turn the anti tip down. middle of a slope. Always drive as straight as possible. It is better to ask for assistance than taking risks. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 31: Driving - Up Stairs
• Angle the wheelchair backwards on the marked with this sign: main wheels. Do not lift the wheelchair holding onto the leg,- arm or head supports. Turn the anti tip down. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 32: Transfer
Before transfer to chair: • Tilt the chair back • Remove the head support • Remove the leg supports • Open the back rest angle slightly • Replace the components when transfer is finished. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 33: Lifting The Chair
To avoid this risk, netti mini is as a standard delivered with we recommend spoke protectors as 2° camber. This can be changed to 4° by accessory. -
Page 34: Maintenance
Check brake adjustment mainenance instructions. Check tyre wear * As a rule of thumb, use oil on movable parts and all bearings. Alu Rehab recommends use of ordinary bicycle oil Model: Netti Mini My-Netti.com... -
Page 35: Troubleshooting
When in need of spare parts, please contact your dealer. Before making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti Mini My-Netti.com Language:English Version: 2017-11... -
Page 36: Tests And Warranty
Alu Rehab or by use of spare parts delivered or produced by third parties. In such cases, this guarantee shall be considered null and void. -
Page 37: Netti Customized / Individual Adaptations
Netti Mini adapted by the customer cannot keep the CE requires the risk evaluation and acceptance mark given by Alu Rehab A.S Norway. If the of the product responsibility and safety adjustments are performed by other than Alu... -
Page 38: Measurements And Weights
When used as chair in a car: Max user weight 75 kg When mounting accessories such as power kit etc the weight of the accessories must be subtracted from the max user weight. Dealer: Frame number.: Date: Stamp: Model: Netti Mini My-Netti.com Language:English Version: 2017-11... - Page 39 Model: Netti Mini My-Netti.com Language:English Version: 2017-11...
- Page 40 UM0107 UK this product confirms to 2017-11 93/42/eec for medical products. feel free to coNtact uS: dIStrIbutor: MaNufacturer: alu rehab apS alu rehab aS Kløftehøj 8 bedriftsvegen 23 dK-8680 ry 4353 Klepp Stasjon Norway t: +45 87 88 73 00...
Need help?
Do you have a question about the Netti Mini and is the answer not in the manual?
Questions and answers