Track Programming For Recording To Tape - Yamaha CDC-775 Owner's Manual

Yamaha natural sound compact disc player owner's manual
Hide thumbs Also See for CDC-775:
Table of Contents

Advertisement

TRACK PROGRAMMING FOR RECORDING TO TAPE

This convenient feature can be used to program tracks for
recording to tape. By only memorizing the tape's total possible
recording time, the unit will automatically program tracks or
help you to program tracks so they will fit onto the tape with the
least amount of unrecorded space remaining at each end of
the tape.
Automatic tape programming
The unit will automatically program tracks on a disc with the
original order of tracks unchanged.
1
Stop the unit.
2
Select the disc.
3
The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer to
page 24.)
4
Enter the tape's total possible recording time (tape
length).
TAPE
You can select any of four tape lengths by pressing the
TAPE button.
You can also enter the tape's total possible recording
time manually.
Example: For a C-64 tape (32 minutes on each side)
6
STOP
DISC SKIP/
CHARACTER
TAPE
(off)
4
SYNCHRO
PEAK
5
REPEAT RANDOM
1
2
4
6
7
+ 1 0
FILE EDIT
2
CAPS
TEXT MODE
DISC MODE
DISC SCAN
1
STOP
5
Press the REPEAT button.
The unit automatically programs tracks for side A and
side B separately considering the tape's total time.
* The programmed track numbers and the total
number of tracks for side A and B are displayed for a
short time.
6
Begin recording on the tape deck and press the PLAY
button on this unit's remote control transmitter at the
same time.
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit's remote control transmitter.
Notes
It is recommended that you use a tape that is slightly longer
in length than the CD you are recording, because the
programmed tracks on a CD may not fit properly into the
time allowed on each half of the tape.
CD synchronized recording function can be used if your tape
deck is compatible with it. In this case, in step 6 and 7,
press the SYNCHRO button and then press the PLAY
button on this unit's remote control transmitter. Recording
automatically begins. (For details, refer to page 20.)
Display information during programming
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
Shows the total time of programmed tracks for each side.
Shows the programmed track numbers for each side.
OPEN/
DIMMER
TIME
CLOSE
4
TAPE
CLEAR
PROG
3
4
5
8
9
0
INDEX
FILE MODE
ENTER
DISC SKIP/
CHARACTER
7
TEXT SRCH
SKIP/SEARCH
OUTPUT LEVEL
PAUSE
PLAY
6, 7
REPEAT
PROG
1 2 3 4 5
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents