boho office BASIC LINE SQ650 Assembly And Operating Instructions Manual page 23

Additional settings
Installation of the memory control
>> Set window stop <<
Function serves to limit the high point of desk - once set - cannot normally be moved
above the set stop point.
Adjust the height to the position where the stop point should be set.
1. Press and hold the key „S"
2. Shortly after, press and hold key „3"
3. Hold both pressed for ca. 3 secs
The display confirms the setting
Attention ! Favourite positions below the stop are deleted.
>> Delete stop points <<
This function deletes all stop points
Adjust the height to the position where the stop point should be set.
1. Press and hold the key „S"
2. Shortly after, press and hold key „2"
3. Hold both pressed for ca. 3 secs
The display confirms the setting
>> Adjusting the displayed height <<
1. Press and hold the key „S"
2. Shortly after press „UP" and hold
3. Hold both pressed for ca. 3 secs
4. Sobald das Display anfängt zu blinken, lassen Sie bitte die Tasten los
Increase or decrease value.
(The first digit may not need to be changed)
Press the „S" key - the second digit starts flashing.
Press „Up or Down" to change the value.
Press the „S" key - the third digit starts flashing.
Press „Up or Down" to change the value.
Press the „S" key to complete the operation.
i
23