Advertisement
H.264 1080p/60 HDMI Over IP Extender with PoE, RS-232, IR
OMX-10HMIP0002 Transmitter
Transmitter Kit Includes:
One Transmitter
One 5VDC/1A Power Adapter
One IR Transmitter Cable
One IR Blaster Extension Cable
Remote Control
Two Mounting Brackets & Screws
One Phoenix Plug
Set Up and Installation CD
OMX-10HMIP0002 Transmitter
OMX-11IPHM0002 Receiver
INSTALLATION & SPECIFICATIONS
Ocean Matrix
812 Kings Highway • Sauger es, NY 12477
www.oceanmatrix.com
OMX-11IPHM0002 Receiver
Receiver Kit Includes:
One Receiver
One 5VDC/1A Power Adapter
One IR Receiver Cable,
One IR Blaster Extension Cable
Remote Control
Two Mounting Brackets & Screws
One Phoenix Plug
Set Up and Installation CD
Rev1a
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ocean Matrix OMX-10HMIP0002
Summary of Contents for Ocean Matrix OMX-10HMIP0002
- Page 1 OMX-10HMIP0002 Transmitter OMX-11IPHM0002 Receiver H.264 1080p/60 HDMI Over IP Extender with PoE, RS-232, IR INSTALLATION & SPECIFICATIONS OMX-10HMIP0002 Transmitter OMX-11IPHM0002 Receiver Transmitter Kit Includes: Receiver Kit Includes: One Transmitter One Receiver One 5VDC/1A Power Adapter One 5VDC/1A Power Adapter ...
-
Page 2: Specifications
Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation OMX-10HMIP0002 TRANSMITTER RS232 Port IR Ext Channel Group ID Channel Down Channel Up Reset Button Power Input LED Indicators: Green—Data Status / Red—Power On HDMI Output 10 HDMI Input 11 CAT5e/6 I/O 12 IR-TX... -
Page 3: Input Resolution
Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation INPUT RESOLUTION 50Hz 576i/576P/720P/1080P/1080i 60Hz/59.94Hz 480i/480p/720p/1080p 30Hz/29.97Hz 1080P 24Hz 1080P 25Hz 1080P 640x480/800x600/1024x768/1280x768/1280x960/1280x1024/1680x1050/1920x1080/1280x720/ VESA 60Hz 1360x768/1400x1050 CONFIGURATION—Refer to instructions on the included CD 1. When connecting a point-to-point application there is no need to configure the transmitter nor the receiver. - Page 4 Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation INSTALLATION—Refer to instructions on the included CD 2. Login into a Browser: 192.168.1.11 (TX default IP) or 192.168.1.12( RX default IP) Setup IP address for the TX and RX. TX requires user name: admin and password: admin ...
- Page 5 Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation PREPARING THE SWITCH—Refer to instructions on the included CD 1. A switch is required when connecting point-to-many, many-to-point, or many-to-many. 2. If the switch supports IGMP to manage Group ID and DHCP to assign IP addresses to TX and RX automatically then enable the DHCP switch —see SETTING THE IP ADDRESS on page 3).
- Page 6 Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation POINT-TO-MANY CONNECTION—Refer to instructions on the included CD 1. Set the IP addresses for the transmitter and the receiver and prepare the switch as instructed previously. 2. Connect the source device and the TX using HDMI cable.
- Page 7 Ocean Matrix OMX-10HMIP0002 & OMX-11IPHM0002 Installation MANY-TO-MANY CONNECTION—Refer to instructions on the included CD 9. Connect one RS232 cable from the PC or system to the RS232 port on the TX. 10. Connect one RS232 cable from the RX to the RS232 device to be controlled.
-
Page 8: Safety Precautions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ocean Matrix 812 Kings Highway • Sauger es, NY 12477 www.oceanmatrix.com...
Need help?
Do you have a question about the OMX-10HMIP0002 and is the answer not in the manual?
Questions and answers