Home Screen And System Event Icons - Lennox iComfort M30 User Manual

Home Screen and System Event Icons

The following icons are located on home screen and will appear during applicable operations or tasks.
NOTE: The system status icons located along the left-side of the screen will display a text description when touching the
icon.
Icon Function
4
Navigation
Function
System Status
System Status
System Status
Table 1. System and Event Icons
Screen Text Purpose
Selecting this icon will bring up user and installer
menus. A red circle with a number inside of it indi-
Menu
cates a notification is active.
When the away icon is touched, the system will au-
tomatically use energy saving settings - heat-to 62
(16.5) and cool-to 85 (29.5). Temperatures can be
adjusted by pressing on the available temperature
setting (i.e., heat-to or cool-to). To exit away, press
the cancel icon. In a zoning system, all zones are
Away
set to a single heat-to and cool-too setting. Note
that when manually selecting Away from the home
screen, the Smart Away feature (if enabled under
settings) will be temporally disabled until Away is
canceled.
System is heating the home.
Heating
System is cooling the home.
Cooling
If humidification equipment is installed and config-
ured, the system will display this message when
Humidifying
adding humidity to the air in the home.
8