To Play A Source With The Digital Sound Field Processor - Yamaha RX-V480 Owner's Manual

1
Follow steps 1 – 6 shown in "OPERATIONS" on page
13.
2
Turn the DSP on, so that a DSP program name
appears on the display.
EFFECT
3
Select the desired program that is suitable for the
source.
PROGRAM
The selected program name is shown on the display.
4
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on the next page.)
22

To play a source with the digital sound field processor

CONCERT
HALL
PRO LOGIC
2
3
Notes
If you prefer to cancel the DSP, press the EFFECT switch
again. The sound will be the normal 2-channel stereo
without surround sound effect.
In the CONCERT VIDEO, MONO MOVIE, ROCK
CONCERT and CONCERT HALL modes, no sound is
heard from the center speaker.
When a monaural sound source is played in the DOLBY
PRO LOGIC or DOLBY PRO LOGIC ENHANCED mode,
no sound is heard from the front speakers and the rear
speakers. Sound is heard only from the center speaker.
However, if the center mode is in the PHANTOM, the front
speakers output the sound of the center speaker.
When this unit is in the Dolby Pro Logic Surround mode, if
the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE controls, the
relationship between the center and rear channels may
produce an unnatural effect.