Ultratec G3000 Operator's Manual page 8

Menu screens for timer on/off function with remote control only. DMX control ignores these setting.
If set the Fog output stops when fluid gets low (F indicator on
main screen).
HIDDEN MENUS
If set the Fog output stops when fluid gets low (F indicator on
main screen).
8
www.ultratecfx.com
DMX address selection screen. This shows DMX set to channel 1.
Channel 1 data is 58 (0-255) channel 2 is 11.
Code versions for remote, output control, DMX.
Power up starting (use not recommended)