Automatic Preset Ttming - Yamaha RX-497 Owner's Manual

Yamaha stereo receiver user manual
Hide thumbs Also See for RX-497:
Table of Contents

Advertisement

l;jV_j_|lql'lh7 _
You can use the automatic
preset tuning
method
to
automatically
store FM stations.
This fimction
enables
this
unit to automatically
tune into FM stations
with strong
signals
and store up to 40 (8 stations
in each of the 5
groups,
AI to ES) of those received
stations
in order. You
can then easily
recall any preset stations
by selecting
the
preset station numbers
where they are stored.
• Any station data stored under a preset station number is cleared
when you store a new station under that preset station number.
• If the number of received stations does not reach 40 (E8),
automalic preset tuning automatically stops once searching all
available stations are tuned into and stored.
• Only FM stations with suflicient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, try using the manual
preset tuning method.
2
84
Press
FM/AM
on the front panel
to select
FM
as the reception
band.
FM appears
in the t>ont panel display.
F_AM
Press and hold MEMORY on the front panel
for more than 3 seconds.
The preset station group and the MEMORY and
AUTO indicators flash in the front panel display.
Press
TUNING/CH
<1/E>
once
to begin
automatic
preset
tuning.
Press C> to tune into higher frequencies.
Press <1 to tune into lower frequencies.
When automatic
preset tuning
is complete,
the
frequency
of the last preset
station is shown
in the
front panel display.
1
Rotate
the INPUT
selector
(or press TUNER
on the remote
control)
to select
TUNER.
=NPu-r
_)
TUNEF_
or
Front panel
Remote control
• If TL_P'.IINGiCH<1 / C> is not pressed within approximately
5
seconds while the MEMORY and AUTO indicators are
flashing, automatic preset ttming automatically begins from the
currently displayed frequency and proceeds toward higher
frequencies.
• Received stations are sequentially progrannned
to 8 stations in
each preset station group. If 8 stations are all progrannned
in a
preset station group, another 8 stations are sequentially
programmed
in the next preset station group.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-797

Table of Contents